SCHOOL BUSES, R.R.O. 1990, Reg. 612

Section 3

Equipment

Cite as SCHOOL BUSES, R.R.O. 1990, Reg. 612, s. 3 · current to November 11, 2026 · consolidated from July 1, 2022 · read from e-Laws on November 16, 2026

The text

(1) Every school bus registered in Ontario shall, (a) be equipped with overhead signal lights that consist of, (i) in the case of a school bus manufactured before January 1, 2005, (A) at least four red only overhead signal lights that comply with the requirements of the appropriate CSA Standard D250 for the school bus depending on its date of manufacture, as set out in subsection 2 (1) or (1.1), or (B) if the school bus was manufactured to the CSA- D250-03 standard, overhead signal lights that comply with subsection 175 (4.1) of the Act and with the requirements of the CSA-D250-03 standard, or (ii) in the case of a school bus manufactured on or after January 1, 2005, overhead signal lights that comply with subsection 175 (4.1) of the Act and with the requirements of the appropriate CSA Standard D250 for the school bus depending on its date of manufacture, as set out in subsection 2 (1) or (1.1); (a.1) be equipped with a control device to actuate the overhead signal lights required by clause (a) that is accessible to the driver and equipped to give the driver a clear and unmistakable signal either visible or audible when the signal lights are operating; (b) be equipped with a first aid kit that complies with, (i) the appropriate CSA Standard D250 for the school bus depending on its date of manufacture, as set out in subsection 2 (1) or (1.1), or (ii) a subsequent CSA Standard D250; (c) be equipped with a system of mirrors that comply with the appropriate CSA Standard D250 for the school bus depending on its date of manufacture, as set out in subsection 2 (1) or (1.1), except that, (i) a school bus manufactured before November 30, 1997 may comply with the mirror requirements prescribed in CSA-D250-98 or CSA-D250-03, and (ii) a school bus manufactured on or after November 30, 1997 and before January 1, 2005 shall comply with the mirror requirements prescribed in CSA-D250-98 or CSA-D250-03; and (d) display the words required by subsection 175 (3.1) of the Act on the front or rear of the bus, as the case may be, in a manner that complies with the requirements of the appropriate CSA Standard D250 for the school bus depending on its date of manufacture, as set out in subsection 2 (1) or (1.1). (e) Revoked: O. Reg. 253/22, s. 1 (2). (2) Every school bus registered in Ontario shall be equipped with a stop arm device that, (a) displays on the front and rear of the device the word “STOP” in upper case letters; and (b) complies with, (i) CSA-D250-98 or CSA-D250-03, in the case of a school bus manufactured before January 1, 2005, or (ii) the appropriate CSA Standard D250 for the school bus depending on its date of manufacture, as set out in subsection 2 (1) or (1.1), in the case of a school bus manufactured on or after January 1, 2005. O. Reg. 129/10, s. 3; O. Reg. 169/13, s. 5 (6). (3) Every school bus registered in Ontario that was manufactured before January 1, 2005 shall be equipped with a pedestrian-student safety crossing arm that complies with the requirements of CSA-D250-07. O. Reg. 129/10, s. 3. (4) Every school bus registered in Ontario shall display, (a) a sign affixed to the bottom of the left window on the rear of the school bus that has the dimensions and bears the markings as illustrated in Figure 1; and (b) a sign affixed to the bottom of the right window on the rear of the bus that has the dimensions and bears the markings as illustrated in Figure 2. figure 1 figure 2 (5) If the dimensions of the left or right window on the rear of a school bus cannot accommodate either or both of the signs as required by subsection (4), both signs shall be affixed to the rear bumper directly below the locations prescribed by clauses (4) (a) and (b). O. Reg. 129/10, s. 3. (6) The signs affixed in accordance with subsection (4) or (5) must be visible at all times to vehicles approaching from the rear of the school bus and shall not be obstructed by any part of or attachment to the school bus. O. Reg. 129/10, s. 3. (7) The signs required by subsection (4) must meet the performance requirements of any of the types of sheeting specified in the American Society for Testing and Materials Standard D 4956-01a and the sheeting must have a Luminance Factor (Y%) of at least 15. O. Reg. 129/10, s. 3.
Read the SCHOOL BUSES on e-Laws ↗

Made under Highway Traffic Act, R.S.O. 1990, c. H.8.