SAFETY HELMETS, R.R.O. 1990, Reg. 610

Section 4

Cite as SAFETY HELMETS, R.R.O. 1990, Reg. 610, s. 4 · current to November 11, 2026 · consolidated from October 18, 2018 · read from e-Laws on November 16, 2026

The text

(1) The helmet referred to in section 3 shall conform to the requirements of one or more of the following standards: 1. Canadian Standards Association CAN/CSA D113.2-M89 (Cycling Helmets). 2. Snell Memorial Foundation B-95 (1995 Standard for Protective Headgear for Use with Bicycles). 3. Snell Memorial Foundation B-90 (1990 Standard for Protective Headgear for Use in Bicycling). 4. Snell Memorial Foundation B-90S (1994 Supplementary Standard for Protective Headgear for Use with Bicycles). 5. American National Standards Institute ANSI Z90.4-1984 (American National Standard for Protective Headgear for Bicyclists). 6. American Society for Testing and Materials ASTM F1447-94 (Standard Specification for Protective Headgear Used in Bicycling). 7. British Standards Institute BS 6863:1989 (British Standard Specification for Pedal Cyclists’ Helmets). 8. Standards Association of Australia AS 2063.2-1990 (Part 2: Helmets for Pedal Cyclists). 9. Snell Memorial Foundation N-94 (1994 Standard for Protective Headgear: for Use in Non-Motorized Sports). 10. United States Consumer Product Safety Commission (CPSC) 16 CFR Part 1203 Safety Standards for Bicycle Helmets. O. Reg. 411/95, s. 1; O. Reg. 38/03, s. 1 (1). (2) The helmet shall bear the mark of the standards authority or the mark of the manufacturer showing that the helmet meets the prescribed standard. O. Reg. 411/95, s. 1. (3) A reference to a standard in subsection (1) includes any amendments made to the standard, whether made before or after February 11, 2003. O. Reg. 38/03, s. 1 (2).
Read the SAFETY HELMETS on e-Laws ↗

Made under Highway Traffic Act, R.S.O. 1990, c. H.8.