GENERAL, R.R.O. 1990, Reg. 369

Section 11

Cite as GENERAL, R.R.O. 1990, Reg. 369, s. 11 · current to November 11, 2026 · consolidated from April 1, 2025 · read from e-Laws on November 16, 2026

The text

(1) In this section, “CSA” means the Canadian Standards Association; (“CSA”) “ISO” means the International Organization for Standardization; (“ISO”) “SAE” means the Society of Automotive Engineers. (“SAE”) O. Reg. 464/05, s. 1. (2) On and after June 15, 2005, a dealer shall ensure that a tractor manufactured after January 1, 1992 and sold or offered for sale shall be equipped with, (a) a rollover protective structure described in subsection (3) and labelled in accordance with subsection (4); and (b) a restraining device described in subsection (5). O. Reg. 464/05, s. 1; O. Reg. 252/10, s. 7. (3) A dealer shall ensure that a rollover protective structure on a tractor manufactured before July 1, 2017 complies with, (a) the provisions referred to in item 1 of Table 1 to this section in the column that applies to the tractor; or (b) the provision referred to in item 2 of Table 1 to this section in the column that applies to the tractor and, (i) the standard referred to in item 3 of Table 1 to this section in the column that applies to the tractor, (ii) the standard referred to in item 4 of Table 1 to this section in the column that applies to the tractor, (iii) the standard referred to in item 5 of Table 1 to this section in the column that applies to the tractor, or (iv) the standard referred to in item 6 of Table 1 to this section in the column that applies to the tractor. O. Reg. 201/17, s. 1 (1). (3.1) A dealer shall ensure that a rollover protective structure on a tractor manufactured on or after July 1, 2017 complies with, (a) the provisions referred to in item 1 of Table 2 to this section in the column that applies to the tractor; or (b) the provision referred to in item 2 of Table 2 to this section in the column that applies to the tractor and, (i) the standard referred to in item 3 of Table 2 to this section in the column that applies to the tractor, (ii) the standard referred to in item 4 of Table 2 to this section in the column that applies to the tractor, (iii) the standard referred to in item 5 of Table 2 to this section in the column that applies to the tractor, or (iv) the standard referred to in item 6 of Table 2 to this section in the column that applies to the tractor. O. Reg. 201/17, s. 1 (1). (4) A rollover protective structure on a tractor shall have permanent legible label showing, (a) the manufacturer’s name; (b) the make and model of tractor that it is designed to fit; and (c) the standards referred to in subsection (3) or (3.1) with which it complies. O. Reg. 464/05, s. 1; O. Reg. 201/17, s. 1 (2). (5) A restraining device on a tractor shall comply with the seat and seat belt requirements set out in, (a) section 5 of SAE Standard J1194, entitled “Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors” and dated April 2009; or (b) clause 4.4.1, under the heading “Seat belts”, from CSA Standard B352.0-16 entitled “Rollover protective structures (ROPS), falling object protective structures (FOPS), operator protective structures (OPS), and tip-over protective structures (TOPS) for mobile machinery — General Canadian requirements” and dated July 2016. O. Reg. 464/05, s. 1; O. Reg. 201/17, s. 1 (3). (6) Despite subsections (3) and (4), where a tractor was manufactured before the date of publication of a standard referred to in either of those subsections, the tractor may comply with a predecessor of the standard that was in effect on the date that the tractor was manufactured. O. Reg. 464/05, s. 1. (7) The standards referred to in this section are available for public inspection at the offices of the Ministry of Agriculture, Food and Rural Affairs, Farm Implements Act Program, 1 Stone Road West, 3rd Floor North East, Guelph, Ontario, N1G 4Y2. O. Reg. 464/05, s. 1; O. Reg. 252/10, s. 8 (3). Table 1 Tractors Manufactured before July 1, 2017 Item | Description of Standard | Tractor manufactured on or before December 31, 2005 | Tractor manufactured from January 1, 2006 to June 30, 2010 | Tractor manufactured from July 1, 2010 to June 30, 2017 1. | Requirements for ROPS on Agricultural Tractors | Clause 5 of CSA Standard B352.1-95, entitled “Rollover Protective Structures (ROPS) for Agricultural, Construction, Earthmoving, Forestry, Industrial, and Mining Machines — Part 2: Testing Requirements for ROPS on Agricultural Tractors” dated August 1995 (Reaffirmed 2004) | Clause 5 of CSA Standard B352.1-95, entitled “Rollover Protective Structures (ROPS) for Agricultural, Construction, Earthmoving, Forestry, Industrial, and Mining Machines — Part 2: Testing Requirements for ROPS on Agricultural Tractors” dated August 1995 (Reaffirmed 2006) | Clause 5 of CSA Standard B352.1-95, entitled “Rollover Protective Structures (ROPS) for Agricultural, Construction, Earthmoving, Forestry, Industrial, and Mining Machines — Part 2: Testing Requirements for ROPS on Agricultural Tractors” dated August 1995 (Reaffirmed 2006) 2. | Rollover Protective Structure Steel Material / Test Temperature Requirements | Clause 4.2 of CSA Standard B352.0-95, entitled “Rollover Protective Structures (ROPS) for Agricultural, Construction, Earthmoving, Forestry, Industrial, and Mining Machines — Part 1: General Requirements for ROPS” dated September 1995 (Reaffirmed 2004) | Clause 4.2 of CSA Standard B352.0-95, entitled “Rollover Protective Structures (ROPS) for Agricultural, Construction, Earthmoving, Forestry, Industrial, and Mining Machines — Part 1: General Requirements for ROPS” dated September 1995 (Reaffirmed 2006) | Clause 4.2 of CSA Standard B352.0-09, entitled “Roll-over protective structures (ROPS), falling object protective structures (FOPS), operator protective structures (OPS), and tip-over protective structures (TOPS) for mobile machinery — General Canadian requirements” dated September 2009 (Reaffirmed 2014), as amended from time to time up to the date of manufacture 3. | Static Test Method and Acceptance Conditions | ISO Standard 5700-1989 (Third edition), entitled “Wheeled tractors for agriculture and forestry — Protective structures — Static test method and acceptance conditions”, published in 1989 and amended in 1998 | ISO Standard 5700:2006, entitled “Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Static test method and acceptance conditions” published in 2006 | ISO Standard 5700:2006, entitled “Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Static test method and acceptance conditions” published in 2006, as amended from time to time up to the date of manufacture 4. | Dynamic Test Method and Acceptance Conditions | ISO Standard 3463-1989 (Third edition), entitled “Wheeled tractors for agriculture and forestry — Protective structures — Dynamic test method and acceptance conditions”, published in1989 and amended in 1998 | ISO Standard 3463:2006, entitled “Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Dynamic test method and acceptance conditions” published in 2006 | ISO Standard 3463:2006, entitled “Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Dynamic test method and acceptance conditions” published in 2006, as amended from time to time up to the date of manufacture 5. | International Standards | SAE Standard J2194, entitled “Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors” dated August 2002 | SAE Standard J2194, entitled “Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors” dated August 2002 | SAE Standard J2194, entitled “Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors” dated August 2002, as amended from time to time up to the date of manufacture 6. | International Standards | Code 3 (Dynamic Test), dated February 2002, or Code 4 (Static Test), dated February 2002, of the Organization for Economic Co-operation and Development Standard Code for the Official Testing of Protective Structures on Agricultural and Forestry Tractors. | Code 3 (Dynamic Test), dated February 2002, or Code 4 (Static Test), dated February 2002, of the Organization for Economic Co-operation and Development Standard Code for the Official Testing of Protective Structures on Agricultural and Forestry Tractors. | Code 3 (Dynamic Test), dated February 2002, or Code 4 (Static Test), dated February 2002, of the Organization for Economic Co-operation and Development Standard Code for the Official Testing of Protective Structures on Agricultural and Forestry Tractors, as amended from time to time up to the date of manufacture. Table 2 Tractors Manufactured on or after July 1, 2017 Item | Description of Standard | Tractor manufactured on or after July 1, 2017 1. | Requirements for ROPS on Agricultural Tractors | CSA Standard B352.0-16, entitled “Rollover protective structures (ROPS), falling object protective structures (FOPS), operator protective structures (OPS), and tip-over protective structures (TOPS) for mobile machinery — General Canadian requirements” published in 2016, as amended from time to time up to the date of manufacture 2. | Rollover Protective Structure Steel Material / Test Temperature Requirements | Clause 4.2 of CSA Standard B352.0-16, entitled “Rollover protective structures (ROPS), falling object protective structures (FOPS), operator protective structures (OPS), and tip-over protective structures (TOPS) for mobile machinery — General Canadian requirements” published in 2016, as amended from time to time up to the date of manufacture 3. | Static Test Method and Acceptance Conditions | CSA Standard CAN/CSA - M5700-09, entitled “Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Static test method and acceptance conditions” published in 2009 (Reaffirmed 2015), as amended from time to time up to the date of manufacture 4. | Dynamic Test Method and Acceptance Conditions | CSA Standard CAN/CSA - M3463-09, entitled “Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Dynamic test method and acceptance conditions” published in 2009 (Reaffirmed 2014), as amended from time to time up to the date of manufacture 5. | International Standards | SAE Standard J2194, entitled “Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors” dated August 2002, as amended from time to time up to the date of manufacture 6. | International Standards | Code 3 (Dynamic Test), dated February 2002, or Code 4 (Static Test), dated February 2002, of the Organization for Economic Co-operation and Development Standard Code for the Official Testing of Protective Structures on Agricultural and Forestry Tractors, as amended from time to time up to the date of manufacture.
Read the GENERAL on e-Laws ↗

Made under Farm Implements Act, R.S.O. 1990, c. F.4.