WASTE MANAGEMENT — PCBs, R.R.O. 1990, Reg. 362
Section 1
Cite as WASTE MANAGEMENT — PCBs, R.R.O. 1990, Reg. 362, s. 1 · current to November 11, 2026 · consolidated from January 1, 2023 · read from e-Laws on November 16, 2026
The text
In this Regulation,
“hold” includes own, possess and have care or control of and “holder” has a corresponding meaning; (“détenir”)
“PCB” means any monochlorinated or polychlorinated biphenyl or any mixture of them or any mixture that contains one or more of them; (“BPC”)
“PCB equipment” means equipment designed or manufactured to operate with PCB liquid or to which PCB liquid was added or drums and other containers used for the storage of PCB liquid; (“appareils contenant des BPC”)
“PCB liquid” means,
(a) liquids, other than liquids used or proposed for use for road oiling, containing PCBs at a concentration of more than fifty parts per million by weight,
(b) liquids used or proposed for use for road oiling, containing PCBs at a concentration of more than five parts per million by weight, and
(c) liquids made contrary to section 6 by diluting liquids referred to in clause (a) or (b); (“liquides contenant des BPC”)
“PCB materials” means materials containing PCBs at a concentration of more than fifty parts per million by weight whether the material is liquid or not; (“matières contenant des BPC”)
“PCB waste” means PCB equipment, PCB liquid or PCB material, but does not include,
(a) PCB material or PCB equipment after it has been decontaminated pursuant to guidelines issued by the Ministry of the Environment or instructions issued by the Director,
(b) PCB equipment that is,
(i) an electrical capacitor that has never contained over one kilogram of PCBs,
(ii) electrical, heat transfer or hydraulic equipment or a vapour diffusion pump that is being put to the use for which it was originally designed or is being stored for such use by a person who uses such equipment for the purpose for which it was originally designed, or
(iii) machinery or equipment referred to in subclause (c) (i), or
(c) PCB liquid that,
(i) is at the site of fixed machinery or equipment, the operation of which is intended to destroy the chemical structure of PCBs by using the PCBs as a source of fuel or chlorine for purposes other than the destruction of PCBs or other wastes and that is subject to an environmental compliance approval issued in respect of an activity mentioned in subsection 9 (1) of the Act after the 1st day of January, 1981 specifying the manner in which PCB liquid be processed in the machinery or equipment, or
(ii) is in PCB equipment referred to in subclause (b) (ii). (“déchets de BPC”) R.R.O. 1990, Reg. 362, s. 1; O. Reg. 232/11, s. 1.
Read the WASTE MANAGEMENT — PCBs on e-Laws ↗
Made under Environmental Protection Act, R.S.O. 1990, c. E.19.