MOBILE PCB DESTRUCTION FACILITIES, R.R.O. 1990, Reg. 352

Section 5

Cite as MOBILE PCB DESTRUCTION FACILITIES, R.R.O. 1990, Reg. 352, s. 5 · current to November 11, 2026 · consolidated from October 31, 2011 · read from e-Laws on November 16, 2026

The text

(1) No owner shall allow a Class 2 mobile PCB destruction facility waste management system to remain on a Class 2 or 3 mobile PCB destruction facility waste disposal site for more than ninety days after the start of its installation or assembly at the site. R.R.O. 1990, Reg. 352, s. 5 (1). (2) No owner shall operate or allow the operation of Class 2 mobile PCB destruction facility waste management systems except, (a) at Class 2 mobile PCB destruction facility waste disposal sites during the first year that they are located in a particular local municipality, if the operations would result in an aggregate, for the year, of more than a total of up to 1,800 hours; or (b) other than as permitted in clause (a), for more than a total of up to 1,440 hours without a break of at least one year before the next operation totalling up to 1,440 hours. R.R.O. 1990, Reg. 352, s. 5 (2). (3) No owner shall operate a mobile PCB destruction facility at any one Class 3 mobile PCB destruction facility waste disposal site for more than a total of up to 168 hours without a break of at least one year before the next operation totalling up to 168 hours may begin. R.R.O. 1990, Reg. 352, s. 5 (3). (4) Subsections (1), (2) and (3) do not apply where prior approval for a longer established site period or a longer operating period is granted by the Director, the municipal government responsible for waste disposal and the local municipality in which the site is located. R.R.O. 1990, Reg. 352, s. 5 (4).
Read the MOBILE PCB DESTRUCTION FACILITIES on e-Laws ↗

Made under Environmental Protection Act, R.S.O. 1990, c. E.19.