MOBILE PCB DESTRUCTION FACILITIES, R.R.O. 1990, Reg. 352

Section 1

Cite as MOBILE PCB DESTRUCTION FACILITIES, R.R.O. 1990, Reg. 352, s. 1 · current to November 11, 2026 · consolidated from October 31, 2011 · read from e-Laws on November 16, 2026

The text

In this Regulation, “local municipality” means a city, town, village, township or improvement district; “mobile PCB destruction facility” means movable, transportable machinery or equipment that is intended to destroy the chemical structure of PCBs; “PCB” means any monochlorinated or polychlorinated biphenyl or any mixture of them or mixture that contains one or more of them; “PCB equipment” means equipment designed or manufactured to operate with PCB liquid or to which PCB liquid was added or drums and other containers used for the storage of PCB liquid; “PCB liquid” means liquid containing PCBs at a concentration of more than fifty milligrams per kilogram; “PCB material” means material containing PCBs at a concentration of more than fifty milligrams per kilogram whether the material is liquid or not; “PCB waste” means, (a) PCB equipment, (b) PCB liquid, or (c) PCB material, but does not include, (d) PCB material or PCB equipment after it has been decontaminated pursuant to guidelines or codes of practice published by the Ministry of the Environment, (e) PCB equipment that is, (i) an electrical capacitor that has never contained over one kilogram of PCBs, (ii) electrical, heat transfer or hydraulic equipment or a vapour diffusion pump that is being put to the use for which it was originally designed or is being stored for such use by a person who uses the equipment for the purpose for which it was originally designed, or (iii) machinery or equipment referred to in subclause (f) (i), or (f) PCB liquid that is, (i) at the site of fixed machinery or equipment, the operation of which is intended to destroy the chemical structure of PCBs by using the PCBs as a source of fuel or chlorine for a purpose other than the destruction of PCBs or other wastes and that is subject to an environmental compliance approval issued in respect of an activity mentioned in subsection 9 (1) of the Act that specifies the manner in which PCB liquid be processed in the machinery or equipment, or (ii) in PCB equipment referred to in subclause (e) (ii); “thermal treatment” includes incineration, gasification, pyrolysis or plasma arc treatment. R.R.O. 1990, Reg. 352, s. 1; O. Reg. 108/07, s. 1; O. Reg. 233/11, s. 1.
Read the MOBILE PCB DESTRUCTION FACILITIES on e-Laws ↗

Made under Environmental Protection Act, R.S.O. 1990, c. E.19.