GENERAL — WASTE MANAGEMENT, R.R.O. 1990, Reg. 347
Section 12
Cite as GENERAL — WASTE MANAGEMENT, R.R.O. 1990, Reg. 347, s. 12 · current to November 11, 2026 · consolidated from September 1, 2026 · read from e-Laws on November 16, 2026
The text
The following are prescribed as standards for the location, maintenance and operation of a thermal treatment site:
1. The location of the thermal treatment site shall be selected so as to reduce the effects of nuisances such as dust, noise and traffic.
2. Fly-ash that is hazardous waste and that results from the incineration of waste that is neither hazardous waste nor liquid industrial waste shall be kept separate from incinerator ash and disposed of or otherwise dealt with separately from incinerator ash.
3. Fly-ash that is hazardous waste and that results from the incineration of waste that is neither hazardous waste nor liquid industrial waste shall only be disposed of at,
i. Revoked: O. Reg. 337/09, s. 6.
ii. a landfilling site authorized to accept fly-ash that is hazardous waste and that results from the incineration of waste that is neither hazardous waste nor liquid industrial waste by the terms of,
A. an environmental compliance approval issued after the 1st day of January, 1990, or
B. an amendment to an environmental compliance approval made after the 1st day of January, 1990.
4. The thermal treatment equipment shall be located,
i. so that it is accessible for the transportation of wastes thereto without nuisance,
ii. taking into account meteorological considerations to minimize environmental effects, and
iii. so that the services and utilities required for the operation of the thermal treatment equipment are available, including facilities for the disposal of residue and of quenching and scrubbing water.
5. The design and capacity of the thermal treatment equipment shall be of a type and size adequate to efficiently process the quantities of waste that may be expected, so that a minimum volume of residue is obtained, the putrescible materials remaining as residue are reduced to a minimum and a minimum of air pollution results.
6. The following equipment shall be provided as necessary for particular applications:
i. Scales for the accurate determination of the input of all wastes by weight.
ii. A storage pit or other storage facilities.
iii. A crane or other means of removing waste from the pit or other storage facilities.
iv. Means of controlling dusts and odours.
v. Such instruments as may be necessary for the efficient operation of the thermal treatment equipment.
7. The thermal treatment site shall include an unloading area properly enclosed and of sufficient size for the intended operation.
8. Access roads shall be provided for vehicles hauling waste to the thermal treatment site.
9. On-site fire protection shall be provided and, where possible, arrangements shall be made with a fire department or municipality for adequate fire fighting services in case of an emergency.
10. Scavenging shall not be permitted. R.R.O. 1990, Reg. 347, s. 12; O. Reg. 102/07, s. 7; O. Reg. 337/09, s. 6; O. Reg. 234/11, s. 13.
Read the GENERAL — WASTE MANAGEMENT on e-Laws ↗
Made under Environmental Protection Act, R.S.O. 1990, c. E.19.