RULES OF CIVIL PROCEDURE, R.R.O. 1990, Reg. 194

Section 4.01

Document Standards

Cite as RULES OF CIVIL PROCEDURE, R.R.O. 1990, Reg. 194, s. 4.01 · current to November 11, 2026 · consolidated from November 13, 2026 · read from e-Laws on November 16, 2026

The text

A document in writing in a proceeding shall meet the following standards: 1. In the case of a document in paper format, i. the text shall be printed, typed, written or reproduced legibly, with double spaces between the lines and a margin of approximately 40 millimetres on the left-hand side, ii. the characters used shall be of at least 12 point or 10 pitch size, iii. good quality white paper or good quality near white recycled paper 216 millimetres by 279 millimetres shall be used, and iv. text may appear on one side or on both sides of the paper. 2. In the case of a document that is filed or submitted in electronic format using software authorized by the Ministry of the Attorney General for the purpose, the document must meet, i. the requirements set out in subparagraph 1 i and ii, and ii. any requirements specified by the authorized software. O. Reg. 689/20, s. 2.
Read the RULES OF CIVIL PROCEDURE on e-Laws ↗

Made under Courts of Justice Act, R.S.O. 1990, c. C.43.