AIR POLLUTION — DISCHARGE OF BENZENE FROM INEOS STYROLUTION, O. Reg. 206/24
Section 14
Public reporting
Cite as AIR POLLUTION — DISCHARGE OF BENZENE FROM INEOS STYROLUTION, O. Reg. 206/24, s. 14 · current to November 11, 2026 · consolidated from August 29, 2024 · read from e-Laws on November 16, 2026
The text
(1) The owner and operator of the INEOS Styrolution facility shall ensure that the information listed in subsection (2) in respect of the following measurements is posted on a publicly accessible website as soon as possible after the measurement is taken:
1. Measurements of BTEX and styrene taken by the fenceline monitoring system and open path monitoring system set out in the accepted monitoring plan.
2. Measurements of benzene or, if applicable, measurements of BTEX and styrene taken by back-up measurement methods set out in the accepted monitoring plan.
3. Measurements of benzene taken by back-up measurement methods required under subsection 10 (7).
(2) The following is the information required to be posted under subsection (1):
1. The value of the measurement.
2. The location of the measurement.
3. The date and time at which the measurement was taken.
(3) The measurements mentioned in subsection (1) may be unvalidated.
(4) The owner and operator of the INEOS Styrolution facility shall ensure that the following information is highlighted on the website if it indicates a possible contravention of subsection 2 (1):
1. Measurements posted under paragraph 3 of subsection (1).
2. Calculations posted in accordance with the accepted monitoring plan.
(5) If any of the measurements mentioned in subsection (1) or the calculations mentioned in paragraph 2 of subsection (4) are determined to be invalid, the owner and operator of the INEOS Styrolution facility shall ensure that those measurements or calculations are highlighted on the website in a manner that indicates the invalidity.
(6) No later than one month after this subsection comes into force, the owner and operator of the INEOS Styrolution facility shall ensure that one or more maps showing the following measurement locations are posted on a publicly accessible website:
1. Each air sampler and analyzer in the fenceline monitoring system set out in the accepted monitoring plan, if applicable.
2. Each detector and analyzer in the open path monitoring system set out in the accepted monitoring plan, if applicable.
3. Each location that the concentration of benzene in the air is measured in accordance with a requirement described in subsection 10 (6).
(7) If there is a change to any of the information required to be shown on the maps mentioned in subsection (6), the owner and operator of the INEOS Styrolution facility shall ensure that an updated map is posted on a publicly accessible website as soon as possible after the change is made.
(8) The owner and operator of the INEOS Styrolution facility shall ensure that the meteorological data required to be collected in accordance with the accepted monitoring plan is posted on a publicly accessible website as soon as possible after the data is collected.
(9) If notification is given under subsection 3 (1), the owner and operator of the INEOS Styrolution facility shall ensure that,
(a) a summary of the information set out in subsection 4 (2) is posted on a publicly accessible website within 14 days after the notification is given; and
(b) a summary of each monthly update required under subsection 4 (4) is posted on a publicly accessible website as soon as possible after the update is submitted.
(10) If notification is given under subsection 3 (3), the owner and operator of the INEOS Styrolution facility shall ensure that the information set out in paragraphs 2 and 3 of subsection 3 (4) is posted on a publicly accessible website as soon as possible after the notification is given.
(11) If notification is given under subsection 11 (1) or (2), the owner and operator of the INEOS Styrolution facility shall ensure that the information set out in paragraphs 1 and 2 of subsection 11 (3) is posted on a publicly accessible website as soon as possible after the notification is given.
(12) In addition to the requirement set out in subsection 66 (2) of the Petrochemical Industry Standard, the owner and operator of the INEOS Styrolution facility shall ensure that no later than 30 days after the concentration of benzene is measured over a two-week period by a monitor mentioned in subsection 60 (2) of the Petrochemical Industry Standard, the measurement and the related calculation mentioned in paragraph 4 of subsection 13 (1) of this Regulation are posted on a publicly accessible website.
(13) If a measurement or calculation mentioned in subsection (12) indicates that a contravention of subsection 2 (1) may have occurred, the owner and operator of the INEOS Styrolution facility shall ensure that the measurement or calculation is highlighted on the website in a manner that indicates a possible contravention.
(14) Any information required under this Regulation to be posted on a publicly accessible website shall not be removed from the website until at least seven years after the information was posted.
Read the AIR POLLUTION — DISCHARGE OF BENZENE FROM INEOS STYROLUTION on e-Laws ↗
Made under Environmental Protection Act, R.S.O. 1990, c. E.19.