GENERAL, O. Reg. 877/21

Section 9

Practice of compulsory trade

Cite as GENERAL, O. Reg. 877/21, s. 9 · current to November 11, 2026 · consolidated from April 11, 2025 · read from e-Laws on November 16, 2026

The text

(1) The following individuals are exempt from section 6 of the Act: 1. An individual who is receiving training and work experience in a compulsory trade while participating in a program described in clause 1 (1) (a), (b) or (c). 2. An individual who is permanently employed in an industrial plant, while performing work entirely within the plant and premises or on the land appertaining to them, except work performed in the maintenance and repair of motor vehicles, trailers or conversion units registered for use on a highway under the Highway Traffic Act. 3. An individual who holds a valid equivalent certificate of qualification issued by the Province of Quebec, or is registered as an apprentice in the Province of Quebec, in one of the following trades while engaging in the practice of the trade in Ontario: i. Electrician — Construction and Maintenance. ii. Hoisting Engineer — Mobile Crane Operator 1. iii. Plumber. iv. Refrigeration and Air Conditioning Systems Mechanic. v. Sheet Metal Worker. vi. Sprinkler and Fire Protection Installer. vii. Steamfitter. 4. An individual while removing or replacing wheels and rims on motor coaches, heavy trucks or truck-trailers, if the individual has successfully completed a course of study approved by the Minister on the removal and replacement of wheels and rims. 5. An individual who is the driver of a heavy truck or truck-trailer, while inspecting or adjusting the air chamber push rod stroke, commonly known as the air brake adjustment (commercial vehicle), of the truck or truck-trailer’s air braking system if, i. the driver holds a valid Ontario Class A or D driver’s licence with an air brake endorsement issued under the Highway Traffic Act and has successfully completed a course of study approved by the Minister on the inspection and adjustment of the air chamber push rod stroke of an air braking system, or ii. the driver holds a valid driver’s licence issued by another province or territory of Canada or by a state of the United States of America and is authorized, in that province, territory or state, to inspect and adjust the air braking system’s air chamber push rod stroke. 6. An individual, while installing, removing, maintaining and testing water meters that have an inlet and outlet of 25 millimetres or less, if the individual has successfully completed a training program approved by the Minister on the installation, removal, maintenance and testing of water meters. (2) For the purposes of paragraph 4 of subsection (1), an individual is deemed to have successfully completed a course of study referred to in that paragraph if the individual, (a) holds a certificate issued by the Minister pursuant to section 66 of the Ontario College of Trades and Apprenticeship Act, 2009 in the trade of tire, wheel and rim mechanic; or (b) held a certificate of qualification in the trade of tire, wheel and rim mechanic on June 30, 2019 under the Ontario College of Trades and Apprenticeship Act, 2009.
Read the GENERAL on e-Laws ↗

Made under Building Opportunities in the Skilled Trades Act, 2021, S.O. 2021, c. 28.