GENERAL, O. Reg. 877/21

Section 5

Training agreements

Cite as GENERAL, O. Reg. 877/21, s. 5 · current to November 11, 2026 · consolidated from April 11, 2025 · read from e-Laws on November 16, 2026

The text

(1) The following academic standards are prescribed for the purposes of registration of a training agreement under subsection 15 (1) of the Act: 1. The individual who is to receive the training has successfully completed Grade 12 in Ontario or has successfully completed an academic standard that the Minister considers equivalent to Grade 12. 2. If the training agreement relates to a trade set out in Column 1 of Table 1, the individual who is to receive the training has successfully completed the grade in Ontario set out in Column 2 opposite the trade, or has successfully completed an academic standard that the Minister considers equivalent to that grade. O. Reg. 877/21, s. 5 (1); O. Reg. 523/24, s. 1 (1); O. Reg. 35/25, s. 3 (1). (1.1) The following criteria are prescribed for the purposes of clause 15 (1) (b) of the Act as criteria that must be met for the registration of a training agreement: 1. The sponsor is not, i. the board of directors of the Corporation or a committee of the board, or ii. the individual who is applying for registration as an apprentice. 2. If the sponsor is an educational institution, the Registrar is satisfied that the registration of the training agreement would not result in a real or perceived conflict of interest in respect of the sponsor. 3. The Registrar is satisfied that the sponsor will be able to comply with the terms of the training agreement. O. Reg. 35/25, s. 3 (2). (1.2) For the purposes of clause 15 (1) (d) of the Act, for the registration of a training agreement in a trade set out in Column 1 of Table 2, the prerequisites set out in Column 2 of the Table opposite the trade are prescribed as other criteria that must be satisfied. O. Reg. 35/25, s. 3 (2). (2) The following alternative criteria are prescribed for the purposes of subsection 15 (1.1) of the Act: 1. The individual to receive the training is at least 21 years old or has not received formal education for a period of at least three years. 2. The individual has met any other criteria that have been established by the Registrar. O. Reg. 523/24, s. 1 (2). Table 1 GRadeS Item | Column 1 Trade | Column 2 Grade 1. | Architectural Glass and Metal Technician | 10 2. | Assistant Cook | 10 3. | Auto Body Repairer | 10 4. | Brick and Stone Mason | 10 5. | Cement (Concrete) Finisher | 10 6. | Construction Boilermaker | 10 7. | Construction Craft Worker | 10 8. | Construction Millwright | 10 9. | Drywall, Acoustic and Lathing Applicator | 10 10. | Drywall Finisher and Plasterer | 10 11. | Electrician — Construction and Maintenance | 10 12. | Electrician — Domestic and Rural | 10 13. | Floor Covering Installer | 10 14. | General Carpenter | 10 15. | Hazardous Materials Worker | 10 16. | Heat and Frost Insulator | 10 17. | Hoisting Engineer — Mobile Crane Operator 1 | 10 18. | Hoisting Engineer — Mobile Crane Operator 2 | 10 19. | Hoisting Engineer — Tower Crane Operator | 10 20. | Ironworker — Generalist | 10 21. | Ironworker — Structural and Ornamental | 10 22. | Painter and Decorator — Commercial and Residential | 10 23. | Painter and Decorator — Industrial | 10 24. | Plumber | 10 25. | Powerline Technician | 10 26. | Precast Concrete Erector | 10 27. | Precast Concrete Finisher | 10 28. | Refrigeration and Air Conditioning Systems Mechanic | 10 29. | Reinforcing Rodworker | 10 30. | Residential Air Conditioning Systems Mechanic | 10 31. | Residential (Low Rise) Sheet Metal Installer | 10 32. | Restoration Mason | 10 33. | Roofer | 10 34. | Sheet Metal Worker | 10 35. | Sprinkler and Fire Protection Installer | 10 36. | Steamfitter | 10 37. | Terrazzo, Tile and Marble Setter | 10 38. | Tractor-Trailer Commercial Driver | 10 TABLE 2 PreRequisites Item | Column 1 Trade | Column 2 Prerequisite 1. | Chef | The individual holds a certificate of qualification with red seal endorsement in the trade of cook, and has at least one year of related work experience after the date on which they received their red seal certification. 2. | Computer numerical control (CNC) programmer | The individual holds a certificate of qualification in one of the following trades: general machinist; mould maker; tool and die maker; tool/tooling maker; pattern maker. 3. | Die designer | The individual holds a certificate of qualification in the trade of tool and die maker. 4. | Mould designer | The individual holds a certificate of qualification in the trade of mould maker. 5. | Refractory mason | The individual holds a certificate of qualification in the trade of brick and stone mason. 6. | Tool and gauge inspector | The individual holds a certificate of qualification in the trade of tool and die maker. 7. | Elevating devices mechanic | The individual holds a certificate issued under Ontario Regulation 222/01 (Certification and Training of Elevating Device Mechanics) made under the Technical Standards and Safety Act, 2000, designating them as an elevating device mechanic-in-training, class T. 6., 6.1 Revoked: O. Reg. 35/25, s. 4.
Read the GENERAL on e-Laws ↗

Made under Building Opportunities in the Skilled Trades Act, 2021, S.O. 2021, c. 28.