PILOT PROJECT - ELECTRIC KICK-SCOOTERS, O. Reg. 389/19
Section 9
Equipment
Cite as PILOT PROJECT - ELECTRIC KICK-SCOOTERS, O. Reg. 389/19, s. 9 · current to November 11, 2026 · consolidated from October 25, 2024 · read from e-Laws on November 16, 2026
The text
(1) An electric kick-scooter shall have one or more electric batteries that are the sole source of power to the motor.
(2) An electric kick-scooter shall not have,
(a) a seat, surface or structure that could be used as a seat;
(b) pedals attached to it;
(c) a basket attached to it;
(d) wheels with a diameter of more than 430 millimetres; or
(e) any structure to enclose the electric kick-scooter.
(3) The weight of an electric kick-scooter, including the weight of the battery but otherwise unladen, shall not exceed 45 kilograms.
(4) The battery and motor of an electric kick-scooter shall be securely fastened to the electric kick-scooter to prevent them from moving while the electric kick-scooter is in motion.
(5) All electric terminals on an electric kick-scooter shall be completely insulated and covered.
(6) An electric kick-scooter shall not be modified after its manufacture in any way that may result in increasing its power or its maximum speed beyond the limits set out in the definition of “electric kick-scooter”.
(7) The motor of an electric kick-scooter shall cease to propel the electric kick-scooter forward if the accelerator is released or the brakes are applied.
(8) The braking system of an electric kick-scooter must be capable of bringing the electric kick-scooter, while being operated at a speed of 24 kilometres per hour on a clean, paved and level surface, to a full stop within nine metres from the point at which the brakes were applied.
(9) An electric kick-scooter and all of its components shall be maintained in good working order at all times.
Read the PILOT PROJECT - ELECTRIC KICK-SCOOTERS on e-Laws ↗
Made under Highway Traffic Act, R.S.O. 1990, c. H.8.