ENERGY AND WATER EFFICIENCY — APPLIANCES AND PRODUCTS, O. Reg. 509/18

Section 5

Exceptions, continuing compliance and early compliance

Cite as ENERGY AND WATER EFFICIENCY — APPLIANCES AND PRODUCTS, O. Reg. 509/18, s. 5 · current to November 11, 2026 · consolidated from January 1, 2025 · read from e-Laws on November 16, 2026

The text

(1) Despite sections 2, 3 and 4, if a prescribed appliance or product was manufactured before its prescribed date of manufacture and, on the date the appliance or product was manufactured, this Regulation prescribed efficiency standards or requirements for the appliance or product, those efficiency standards or requirements continue to apply. O. Reg. 399/24, s. 1. (2) Despite sections 2, 3 and 4, for the purposes of section 25.35.7 of the Act, a person may apply a testing standard or an efficiency standard or requirement that would be prescribed under this Regulation in respect of an appliance or product if it were to be manufactured on a future date, if the person complies with the following rules: 1. The person shall select a notional future date and apply both the testing standard and the efficiency standard or requirement that would be prescribed if the appliance or product were manufactured on the notional future date. 2. If a required testing standard or a prescribed efficiency standard or requirement incorporates a document by reference as of a fixed date, the person shall, i. use the version of the incorporated document as it reads on the fixed date, and ii. apply the testing standard or the efficiency standard or requirement set out in the incorporated document that would apply if the appliance or product were manufactured on the notional future date referred to in paragraph 1. 3. If a required testing standard or a prescribed efficiency standard or requirement incorporates a document by reference, as it reads on the date the particular appliance or product was manufactured, the person shall, i. use the version of the incorporated document that is in effect on the actual date the particular product or appliance was manufactured, and ii. apply the testing standard or the efficiency standard or requirement set out in the incorporated standard that would apply if the appliance or product were manufactured on the notional future date referred to in paragraph 1. O. Reg. 399/24, s. 1. (3) For greater certainty, early compliance under subsection (2) is not permitted if, (a) no testing standard or efficiency standard or requirement is prescribed under this Regulation in respect of the particular appliance or product on the notional future date selected under paragraph 1 of subsection (2); or (b) no testing standard or efficiency standard or requirement is set out in an incorporated document in respect of the particular appliance or product on the notional future date or the actual date, as the case may be. O. Reg. 399/24, s. 1.
Read the ENERGY AND WATER EFFICIENCY — APPLIANCES AND PRODUCTS on e-Laws ↗

Made under Electricity Act, 1998, S.O. 1998, c. 15, Sched. A.