MUNICIPAL RESIDENTIAL DRINKING WATER SYSTEMS IN SOURCE PROTECTION AREAS, O. Reg. 205/18

Section 2

New municipal residential drinking water systems

Cite as MUNICIPAL RESIDENTIAL DRINKING WATER SYSTEMS IN SOURCE PROTECTION AREAS, O. Reg. 205/18, s. 2 · current to November 11, 2026 · consolidated from July 1, 2026 · read from e-Laws on November 16, 2026

The text

(1) A person who applies to the Director under clause 32 (1) (b) of the Act for a drinking water works permit and a municipal drinking water licence to establish a new municipal residential drinking water system in a source protection area shall ensure that the application complies with subsection (2) of this section if, in the assessment report portion of the source protection plan for the source protection area, a vulnerable area has not been identified where the system’s raw water supply is located. (2) An application for a drinking water works permit referred to in subsection (1) must be accompanied by a copy of a notice described in clause 48 (1.1) (b) of Ontario Regulation 287/07 (General) made under the Clean Water Act, 2006 that was given to the owner of the system by the source protection authority for the area in which the system is located.
Read the MUNICIPAL RESIDENTIAL DRINKING WATER SYSTEMS IN SOURCE PROTECTION AREAS on e-Laws ↗

Made under Safe Drinking Water Act, 2002, S.O. 2002, c. 32.