REGISTRATIONS UNDER PART II.2 OF THE ACT — ACTIVITIES REQUIRING ASSESSMENT OF AIR EMISSIONS, O. Reg. 1/17
Section 12
EASR ESDM report requirements
Cite as REGISTRATIONS UNDER PART II.2 OF THE ACT — ACTIVITIES REQUIRING ASSESSMENT OF AIR EMISSIONS, O. Reg. 1/17, s. 12 · current to November 11, 2026 · consolidated from July 28, 2026 · read from e-Laws on November 16, 2026
The text
(1) The following are the requirements for an EASR ESDM report:
1. It must be dated, signed and sealed by a licensed engineering practitioner and set out the practitioner’s name and licence number.
2. The information in the report must be accurate as of the date it is signed and sealed.
3. It must set out the primary NAICS code and any other applicable NAICS codes for the facility.
4. It must be prepared in accordance with section 26 of Ontario Regulation 419/05 (Air Pollution — Local Air Quality) made under the Act, subject to subsection (2) of this section, using one or more approved dispersion models in accordance with subsection 6 (1) of that Regulation. The approved dispersion models must be used in accordance with sections 9 to 17 of that Regulation.
5. It must demonstrate that the concentration of each contaminant discharged or proposed to be discharged from the facility into the air, predicted by the approved dispersion model for the point of impingement with the highest concentration of the contaminant, meets one of the following criteria:
i. If the contaminant is identified in the ACB list as belonging to the category “Benchmark 1”, the concentration must be at or below the concentration for each specified averaging period set out for the contaminant in that document.
ii. If the contaminant is identified in the ACB list as belonging to the category “Benchmark 2”,
A. the concentration must be at or below the concentration for each specified averaging period set out for the contaminant in that document, or
B. if the concentration is above the concentration for a specified averaging period set out for the contaminant in that document, the concentration must not be likely to cause an adverse effect for that averaging period.
iii. If subparagraphs i and ii do not apply to the contaminant, the concentration must not be likely to cause an adverse effect for a specified averaging period that relates to the adverse effect.
(2) The Emissions Summary Table described in paragraph 14 of subsection 26 (1) of Ontario Regulation 419/05 and required to be prepared under paragraph 4 of subsection (1) must include the following information in addition to the information required by Ontario Regulation 419/05:
1. With respect to each contaminant to which sections 19 and 20 of Ontario Regulation 419/05 do not apply in respect of an averaging period, a comparison between the concentration predicted by the approved dispersion model for the point of impingement with the highest concentration and the concentration for the contaminant set out in the ACB list.
2. The comparison described in paragraph 1 must be included for each averaging period set out for the contaminant in the ACB list.
3. The comparison described in paragraph 1 must be expressed as a percentage of the concentration set out in the ACB list.
Read the REGISTRATIONS UNDER PART II.2 OF THE ACT — ACTIVITIES REQUIRING ASSESSMENT OF AIR EMISSIONS on e-Laws ↗
Made under Environmental Protection Act, R.S.O. 1990, c. E.19.