REGISTRATIONS UNDER PART II.2 OF THE ACT - END-OF-LIFE VEHICLES, O. Reg. 85/16

Section 5

Prescribed activities, s. 20.21 of the Act - air

Cite as REGISTRATIONS UNDER PART II.2 OF THE ACT - END-OF-LIFE VEHICLES, O. Reg. 85/16, s. 5 · current to November 11, 2026 · consolidated from September 30, 2017 · read from e-Laws on November 16, 2026

The text

(1) Subject to subsection (4), the following are prescribed activities for the purposes of subsection 20.21 (1) of the Act: 1. The use, operation, construction, alteration, extension or replacement of any structure, equipment, apparatus, mechanism or thing that meets the criteria set out in subsection (2) and that may discharge or from which may be discharged a contaminant into any part of the natural environment other than water. 2. The alteration of a process or rate of production with respect to any structure, equipment, apparatus, mechanism or thing that meets the criteria set out in subsection (2) if the alteration may result in one of the following: i. A contaminant being discharged into any part of the natural environment other than water. ii. The rate or manner of discharge of a contaminant into any part of the natural environment other than water being altered. (2) The criteria referred to in paragraphs 1 and 2 of subsection (1) with respect to a structure, equipment, apparatus, mechanism or thing are the following: 1. The structure, equipment, apparatus, mechanism or thing is used at an end-of-life vehicle waste disposal site for the management of a material that is permitted to be managed at the site, or for a use that is ancillary to the operation of the site. 2. The structure, equipment, apparatus, mechanism or thing is not a shredder that is used or operated to shred metal. 3. The equipment, apparatus, mechanism or thing is not used or operated to cut, using heat, metal with a thickness greater than 250 mm. 4. If the equipment, apparatus, mechanism or thing is used to crush or shear metal on more than 50 days in a calendar year and the distance between the crusher or shear and the property boundary of a noise receptor is less than 250 metres, an acoustic barrier that meets the following requirements is installed on the site of the crusher or shear: i. An acoustic barrier that breaks the line of sight between the crusher or shear and the noise receptor. ii. An acoustic barrier that has a density of at least 20 kg/m². (3) For the purposes of paragraph 4 of subsection (2), the distance between a crusher or shear and the property boundary of a noise receptor shall be measured horizontally from the point that is located on the edge of the unit and closest to the property boundary of the noise receptor to the point that is located on the property boundary of the noise receptor and closest to the point from which the measurement is made. (4) This section does not apply in respect of activities related to a structure, equipment, apparatus, mechanism or thing that is exempt from section 9 of the Act.
Read the REGISTRATIONS UNDER PART II.2 OF THE ACT - END-OF-LIFE VEHICLES on e-Laws ↗

Made under Environmental Protection Act, R.S.O. 1990, c. E.19.