ALTERNATIVE LOW-CARBON FUELS, O. Reg. 79/15
Section 10
Sampling and analysis, alternative low-carbon fuel
Cite as ALTERNATIVE LOW-CARBON FUELS, O. Reg. 79/15, s. 10 · current to November 11, 2026 · consolidated from July 28, 2026 · read from e-Laws on November 16, 2026
The text
(1) The carbon dioxide emission intensity of a fuel proposed to be combusted as an alternative low-carbon fuel, rounded to three significant digits, shall be determined according to the following formula:
Carbon dioxide emission intensity = CCnon-bio × 3.67/HHV
where,
CCtotal = the total carbon content of the coal or coke,
HHV = the high heat value of the coal or coke.
(1.1) The total carbon content and high heat value of a fuel proposed to be combusted as an alternative low-carbon fuel shall be determined by using,
(a) samples of the fuel taken and analyzed in accordance with subsection (2); or
(b) data from published literature or third parties, that has been analyzed in accordance with a prescribed chemical analysis method, with respect to the fuel and the parameters required for the equation referred to in subsection (1). O. Reg. 824/21, s. 7 (1).
(2) The samples of the fuel referred to in clause (1.1) (a) must be taken and analyzed in accordance with the following rules:
1. Only samples taken within 36 months before the determination is made shall be used.
2. One of the following methods shall be applied:
i. Analysis in accordance with a prescribed chemical analysis method of at least one sample of the fuel.
ii. Analysis in accordance with a prescribed chemical analysis method of at least one sample of each of the individual materials that the fuel is composed of or derived from, using a weighted average of the carbon content and high heat value of the individual materials.
3. The samples analyzed must provide results that are sufficiently representative of the fuel or individual materials and must allow for adequate characterization of the fuel or individual materials. O. Reg. 79/15, s. 10 (2); O. Reg. 824/21, s. 7 (2, 3).
(3) If the amount of biological carbon content of a fuel is unknown, it shall be determined in accordance with the test methods set out in ASTM D-6866-12, “Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis”, published by ASTM International, as amended from time to time. O. Reg. 79/15, s. 10 (3).
Read the ALTERNATIVE LOW-CARBON FUELS on e-Laws ↗
Made under Environmental Protection Act, R.S.O. 1990, c. E.19.