REGISTRATIONS UNDER PART II.2 OF THE ACT — PRINTING, O. Reg. 349/12

Section 5.1

Activity requirements, s. 20.21 (1) (c) of the Act — individual printing processes

Cite as REGISTRATIONS UNDER PART II.2 OF THE ACT — PRINTING, O. Reg. 349/12, s. 5.1 · current to November 11, 2026 · consolidated from February 3, 2017 · read from e-Laws on November 16, 2026

The text

(1) For digital printing engaged in at the printing facility, either on its own or in combination with other printing, the following requirements apply for the purposes of subsection 5 (1): 1. If, for the purpose of meeting the criterion set out in paragraph 1 of subsection 6 (2), a distance set out in Column 1 of the Table to that paragraph must be met or exceeded as described in that paragraph, i. the amount of organic solvent based liquid inks used in a month at the facility shall not exceed the highest amount set out opposite that distance in Column 2 of that Table, and ii. the amount of water based liquid inks used in a month at the facility shall not exceed the highest amount set out opposite that distance in Column 3 of that Table. O. Reg. 44/15, s. 3. (2) For heatset web lithographic printing engaged in at the printing facility, either on its own or in combination with other printing, the following requirements apply for the purposes of subsection 5 (1): 1. Any fountain solution used shall have a volatile organic compound concentration that is less than 30 per cent by weight, as specified by the manufacturer of the fountain solution. 2. Any ink used after the addition of any reducers shall have a volatile organic compound concentration that is less than 40 per cent by weight. 3. Any coating used shall have a volatile organic compound concentration that is less than 40 per cent by weight, as specified by the manufacturer of the coating. 4. Any adhesive used shall have a volatile organic compound concentration that is less than 40 per cent by weight, as specified by the manufacturer of the adhesive. 5. Each press dryer shall be used or operated at a vacuum at the web slot of at least 1.3 mm of water relative to the press room, or the average capture velocity of the air entering the dryer ports shall be at least 1 metre per second. 6. Each press dryer, when it is used or operated, shall exhaust to equipment that is designed to control the discharge of contaminants and is specified by the manufacturer of the equipment as having a minimum emissions reduction efficiency of 95 per cent. 7. The exhaust stacks associated with the equipment described in paragraph 6 shall be oriented vertically and shall be free of any impediments that would prevent the flow of emissions. 8. If, for the purpose of meeting the criterion set out in paragraph 1 of subsection 9 (2), a distance set out in Column 1 of the Table to that paragraph must be met or exceeded as described in that paragraph, the amount of lithographic printing materials used in a month at the facility shall not exceed the highest amount set out opposite that distance in Column 2 of that Table. O. Reg. 44/15, s. 3. (3) For newspaper lithographic printing engaged in at the printing facility, either on its own or in combination with other printing, the following requirements apply for the purposes of subsection 5 (1): 1. Any fountain solution used shall have a volatile organic compound concentration that is less than 15 per cent by weight, as specified by the manufacturer of the fountain solution. 2. Any ink used shall have a volatile organic compound concentration that is less than five per cent by weight, as specified by the manufacturer of the ink. 3. If, for the purpose of meeting the criterion set out in paragraph 1 of subsection 10 (2), a distance set out in Column 1 of the Table to that paragraph must be met or exceeded as described in that paragraph, the amount of lithographic printing materials used in a month at the facility shall not exceed the highest amount set out opposite that distance in Column 2 of that Table. 4. If, for the purpose of meeting the criterion set out in paragraph 1 of subsection 11 (2), a distance set out in Column 1 of the Table to that paragraph must be met or exceeded as described in that paragraph, the amount of lithographic printing materials used in a month at the facility shall not exceed the highest amount set out opposite that distance in Column 2 of that Table. O. Reg. 44/15, s. 3. (4) For non-heatset web lithographic printing engaged in at the printing facility, either on its own or in combination with other printing, the following requirements apply for the purposes of subsection 5 (1): 1. Any fountain solution used shall have a volatile organic compound concentration that is less than 15 per cent by weight, as specified by the manufacturer of the fountain solution. 2. Any ink used after the addition of any reducers shall have a volatile organic compound concentration that is less than 15 per cent by weight. 3. Any coating used shall have a volatile organic compound concentration that is less than 15 per cent by weight, as specified by the manufacturer of the coating. 4. Any adhesive used shall have a volatile organic compound concentration that is less than 15 per cent by weight, as specified by the manufacturer of the adhesive. 5. If, for the purpose of meeting the criterion set out in paragraph 1 of subsection 14 (2), a distance set out in Column 1 of the Table to that paragraph must be met or exceeded as described in that paragraph, the amount of lithographic printing materials used in a month at the facility shall not exceed the highest amount set out opposite that distance in Column 2 of that Table. O. Reg. 44/15, s. 3. (5) For sheet-fed lithographic printing engaged in at the printing facility, either on its own or in combination with other printing, the following requirements apply for the purposes of subsection 5 (1): 1. Any fountain solution used shall have a volatile organic compound concentration that is less than 15 per cent by weight, as specified by the manufacturer of the fountain solution. 2. Any ink used after the addition of any reducers shall have a volatile organic compound concentration that is less than 15 per cent by weight. 3. Any coating used shall have a volatile organic compound concentration that is less than 15 per cent by weight, as specified by the manufacturer of the coating. 4. Any adhesive used shall have a volatile organic compound concentration that is less than 15 per cent by weight, as specified by the manufacturer of the adhesive. 5. If, for the purpose of meeting the criterion set out in paragraph 1 of subsection 14 (2), a distance set out in Column 1 of the Table to that paragraph must be met or exceeded as described in that paragraph, the amount of lithographic printing materials used in a month at the facility shall not exceed the highest amount set out opposite that distance in Column 2 of that Table. O. Reg. 44/15, s. 3. (6) For screen printing engaged in at the printing facility, either on its own or in combination with other printing, the following requirements apply for the purposes of subsection 5 (1): 1. The exhaust stacks associated with a screen reclamation area or dryer shall be oriented vertically and shall be free of any impediments that would prevent the flow of emissions. 2. Any organic solvent based liquid ink used shall have a volatile organic compound concentration that is less than or equal to 400 g/L. 3. If, for the purpose of meeting the criterion set out in paragraph 1 of subsection 7 (2), a distance set out in Column 1 of the Table to that paragraph must be met or exceeded as described in that paragraph, i. the amount of screen printing materials used in a month at the facility shall not exceed the highest amount set out opposite that distance in Column 2 of that Table, and ii. the amount of cleaning solutions used in a month at the facility shall not exceed the highest amount set out opposite that distance in Column 3 of that Table. O. Reg. 44/15, s. 3.
Read the REGISTRATIONS UNDER PART II.2 OF THE ACT — PRINTING on e-Laws ↗

Made under Environmental Protection Act, R.S.O. 1990, c. E.19.