Integrated Accessibility Standards, O. Reg. 191/11
Section 80.28
Exterior paths of travel, accessible pedestrian control signals
Cite as Integrated Accessibility Standards, O. Reg. 191/11, s. 80.28 · current to November 11, 2026 · consolidated from March 30, 2026 · read from e-Laws on November 16, 2026
The text
(1) Where new traffic control signal systems with pedestrian control signals are being installed or existing pedestrian control signals are being replaced, the pedestrian control signals must meet the requirements for accessible pedestrian control signals set out in subsection (2). O. Reg. 165/16, s. 15 (1).
(2) Accessible pedestrian control signals must meet the following requirements:
1. They must have a locator tone that is distinct from a walk indicator tone.
2. They must be installed within 1,500 mm of the edge of the curb.
3. They must be mounted at a maximum of 1,100 mm above ground level.
4. They must have tactile arrows that align with the direction of crossing.
5. They must include both manual and automatic activation features.
6. They must include both audible and vibro-tactile walk indicators. O. Reg. 413/12, s. 6; O. Reg. 165/16, s. 15 (2).
(3) Where two accessible pedestrian control signal assemblies are installed on the same corner, they must be a minimum of 3,000 mm apart. O. Reg. 413/12, s. 6; O. Reg. 165/16, s. 15 (3).
(4) Where the requirements in subsection (3) cannot be met because of site constraints or existing infrastructure, two accessible pedestrian control signal assemblies can be installed on a single post, and when this occurs, a verbal announcement must clearly state which crossing is active. O. Reg. 413/12, s. 6; O. Reg. 165/16, s. 15 (4).
(5) In this section,
“traffic control signal system” has the same meaning as in Part X of the Highway Traffic Act. O. Reg. 165/16, s. 15 (5).
Read the Integrated Accessibility Standards on e-Laws ↗
Made under Accessibility for Ontarians with Disabilities Act, 2005, S.O. 2005, c. 11.