Performance Standards for the Practice of Professional Land Surveying, O. Reg. 216/10

Section 42

Project quality assurance

Cite as Performance Standards for the Practice of Professional Land Surveying, O. Reg. 216/10, s. 42 · current to November 11, 2026 · consolidated from January 1, 2026 · read from e-Laws on November 16, 2026

The text

(1) When performing photogrammetric surveying for a project, a member shall, in addition to complying with section 5, demonstrate that, (a) system calibration parameters have been properly applied; (b) exterior orientation parameters have been properly applied; (c) data collection meets the project accuracy requirements and adequately covers the project area; (d) the sensing system is internally consistent by confirming the results of redundant project data; (e) the results match the checks derived by an alternate technology; and (f) the results meet the datum, map projection, feature symbology, feature topology and project format criteria. O. Reg. 216/10, s. 42 (1); O. Reg. 310/25, s. 6. (2) When performing photogrammetric surveying for a project, a member shall, (a) acquire adequate measurements and results to verify the internal accuracy of the applied technology and process; and (b) acquire adequate checks that have been derived by alternate technologies that are at least as precise as the sensing technology used for the project results. O. Reg. 216/10, s. 42 (2); O. Reg. 310/25, s. 6.
Read the Performance Standards for the Practice of Professional Land Surveying on e-Laws ↗

Made under Surveyors Act, R.S.O. 1990, c. S.29.