Performance Standards for the Practice of Professional Land Surveying, O. Reg. 216/10
Section 20
Bearings
Cite as Performance Standards for the Practice of Professional Land Surveying, O. Reg. 216/10, s. 20 · current to November 11, 2026 · consolidated from January 1, 2026 · read from e-Laws on November 16, 2026
The text
(1) The origin of the bearings shall be noted on a plan. O. Reg. 216/10, s. 20 (1).
(2) If bearings have been determined from astronomic or gyroscopic observations, a note shall be included on the plan indicating whether the bearings are,
(a) astronomic or gyroscopic, derived from observations on Polaris, or other stars or planets, or derived from gyroscopic observations; and
(b) referred to the meridian at a given longitude or through a stated point on the ground definable by survey. O. Reg. 216/10, s. 20 (2).
(3) If bearings have been derived from survey evidence of a line of known bearing, a note shall be included on the plan,
(a) indicating the source of the bearings, the specified limit from which they are derived and the stated bearing; and
(b) describing the evidence used to re-establish the line. O. Reg. 216/10, s. 20 (3).
(4) If bearings have been derived from specified control points or observed reference points, a note shall be included on the plan indicating that the bearings are grid bearings and are referred to the stated map projection, zone, datum and if applicable adjustment epoch. O. Reg. 216/10, s. 20 (4).
Read the Performance Standards for the Practice of Professional Land Surveying on e-Laws ↗
Made under Surveyors Act, R.S.O. 1990, c. S.29.