Performance Standards, O. Reg. 260/08
Section 1.1
Design of certain buildings
Cite as Performance Standards, O. Reg. 260/08, s. 1.1 · current to November 11, 2026 · consolidated from January 1, 2025 · read from e-Laws on November 16, 2026
The text
The following are prescribed as performance standards with respect to the preparation and provision by a professional engineer of a design for the construction, enlargement or alteration of a building described in paragraph 2 of subsection 12 (6) of the Act:
1. In preparing the design, the professional engineer shall provide information about the building’s compliance with the building code. The information shall be organized in a table and shall be listed under the following headings:
i. Project description (new, addition, alteration, change of use).
ii. Major occupancy or occupancies.
iii. Importance category.
iv. Building area.
v. Gross area of building.
vi. Number of storeys above and below grade.
vii. Building height.
viii. Number of streets and access routes.
ix. Building classification.
x. Sprinkler system proposal.
xi. Standpipe requirements.
xii. Fire alarm requirements.
xiii. Adequacy of water service or supply for fire fighting purposes.
xiv. Whether the building is a high building.
xv. Construction restrictions (combustible, non-combustible or both).
xvi. Mezzanine information (number, area, locations).
xvii. Occupancy load per floor and method of determination.
xviii. Provision of barrier-free design.
xix. Presence of hazardous materials in the building.
xx. Requirements respecting fire resistance rating of horizontal assemblies and supporting members.
xxi. Exterior wall construction type and requirements respecting spatial separations.
xxii. Plumbing fixture requirements.
2. The professional engineer shall ensure that the table is affixed to the topmost sheet of the drawings that he or she prepares as part of the application for a building permit for the building’s construction, enlargement or alteration, or is included in the drawings in a similarly prominent location.
3. The professional engineer shall provide a copy of the table to any other person who the professional engineer knows to be responsible, for the purposes of the building code, for any portion of the design of the construction, enlargement or alteration of the building. O. Reg. 91/14, s. 2.
Read the Performance Standards on e-Laws ↗
Made under Professional Engineers Act, R.S.O. 1990, c. P.28.