Product Safety, O. Reg. 438/07

Section 2

Deemed approvals

Cite as Product Safety, O. Reg. 438/07, s. 2 · current to November 11, 2026 · consolidated from June 26, 2013 · read from e-Laws on November 16, 2026

The text

(1) An electrical product or device that falls into one of the following categories is deemed to be approved: 1. An electrical product or device for which a certification body has issued a report certifying that the electrical product or device conforms to the applicable standards for the electrical product or device and, i. the report is available to the Authority from the certification body, ii. the electrical product or device complies with all standards of design and construction and all terms and conditions set out in the report, and iii. the electrical product or device bears the certification body’s mark, which identifies the electrical product or device as certified for use in Canada. 2. An electrical product or device, if a field evaluation agency has examined the electrical product or device or a sample and issued a report confirming that product or device conforms to the applicable standards for the electrical product or device and presents no undue hazard to persons or property and, i. the electrical product or device is within the scope of Section 3 of the Electrical Safety Code adopted under Ontario Regulation 164/99 (Electrical Safety Code) made under the Act and within the field evaluation agency’s accreditation under the Standards Council of Canada Act (Canada), ii. the electrical product or device bears a label approved for use in either Ontario or Canada affixed by the field evaluation agency, and iii. where the field evaluation agency has examined only a sample, the electrical product or device is of the same design and construction as the sample. 3. An electrical product or device, if the Authority has examined or tested the electrical product or device or a sample and determines that it presents no undue hazard to persons or property and, i. the electrical product or device bears a label affixed by the Authority, ii. all applicable fees have been paid, and iii. where the examination or testing was of only a sample, the electrical product or device is of the same design and construction as the sample. O. Reg. 438/07, s. 2 (1). (2) Where testing is required for the purposes of paragraph 3 of subsection (1), the Authority may accept reports or other evidence of testing from a certification body, field evaluation agency, professional engineer or other competent person. O. Reg. 438/07, s. 2 (2). (3) If an electrical product or device consists of or incorporates a component or components that are deemed to be approved under this section, the electrical product or device is not deemed to be approved unless the whole product or device as assembled is deemed to be approved under this section. O. Reg. 438/07, s. 2 (3). (4) In this section, “competent person” means a person who is qualified because of knowledge, training and experience to assess the design, construction or functioning of an electrical product or device in accordance with applicable standards for the determination of any undue hazard to a person or property. O. Reg. 438/07, s. 2 (4).
Read the Product Safety on e-Laws ↗

Made under Electricity Act, 1998, S.O. 1998, c. 15, Sched. A.