fire code, O. Reg. 213/07

Section 2.7.1.4

Cite as fire code, O. Reg. 213/07, s. 2.7.1.4 · current to November 11, 2026 · consolidated from January 1, 2026 · read from e-Laws on November 16, 2026

The text

(1) The number of persons occupying a room or floor space in an assembly occupancy shall not exceed the occupant load for the intended use as determined in Sentence (2). (2) The occupant load for any room or floor space shall be the lower of (a) the occupant load as calculated in accordance with Sentences (3) to (7), or (b) the occupant load for which means of egress are provided as determined by the Building Code. (3) The occupant load of a floor area or part of a floor area in an assembly occupancy shall be based on (a) the number of fixed seats, or (b) the number of persons (i) for which the area is designed, or (ii) determined from Table 2.7.1.A. for occupancies other than those described in Clause (a). (4) For the purposes of this Article, mezzanines, tiers and balconies shall be regarded as part of the floor area. (5) Where fixed bench-type seats without arms are provided, the occupant load shall be based on a seat width of 450 mm per person. (6) The occupant load of a room in which a dance floor is situated shall be based on that portion of the room that is not occupied by the dance floor except where the occupant load is determined using Subclause (3)(b)(i). (7) At no time shall the maximum occupant load determined in Sentences (2) to (6) exceed the occupant load calculated on the basis of (a) 0.60 m2 of floor space per person in dining, alcoholic beverage and cafeteria space, and (b) 0.40 m2 of floor space per person for all other uses. Table 2.7.1.A.
Read the fire code on e-Laws ↗

Made under Fire Protection and Prevention Act, 1997, S.O. 1997, c. 4.