air pollution — local Air quality, O. Reg. 419/05
Section 9
Same structure contamination
Cite as air pollution — local Air quality, O. Reg. 419/05, s. 9 · current to November 11, 2026 · consolidated from July 1, 2023 · read from e-Laws on November 16, 2026
The text
(1) The following approved dispersion models are the only approved dispersion models that may be used for the purposes of this Part with respect to the contaminant and a point of impingement that is located on the same structure as the source of contaminant:
1. The ASHRAE method of calculation.
2. A dispersion model or combination of dispersion models that, pursuant to subsection 7 (3), is deemed to be included in references in this Part to approved dispersion models, if the notice given under subsection 7 (1) states that the Director is of the opinion that the dispersion model or combination of dispersion models would predict concentrations of the contaminant at least as accurately as the ASHRAE method of calculation.
3. The method of calculation required by the Appendix to Regulation 346, if section 19 applies to discharges of the contaminant. O. Reg. 516/07, s. 5; O. Reg. 507/09, s. 7.
(2) The ASHRAE method of calculation may be used for the purposes of this Part with respect to a contaminant only with respect to a point of impingement that is located on the same structure as the source of contaminant. O. Reg. 516/07, s. 5.
Read the air pollution — local Air quality on e-Laws ↗
Made under Environmental Protection Act, R.S.O. 1990, c. E.19.