vehicle weights and dimensions — for safe, productive and infrastructure-friendly vehicles, O. Reg. 413/05

Section 36

Flexible aerodynamic devices not included in length

Cite as vehicle weights and dimensions — for safe, productive and infrastructure-friendly vehicles, O. Reg. 413/05, s. 36 · current to November 11, 2026 · consolidated from January 1, 2024 · read from e-Laws on November 16, 2026

The text

(1) An aerodynamic device with which a commercial motor vehicle or trailer is equipped is exempt from clauses 109 (13.1) (a) and (b) of the Act if the device meets all of the following conditions: 1. The device is a flexible aerodynamic device. 2. When the device is not deployed, the device is capable of being folded so that no portion of it extends more than 0.305 metres beyond the rear of the vehicle or trailer. 3. When the device is deployed, no portion of the device that is 1.9 metres or less above the ground extends beyond a transverse vertical plane that, i. starts from the rear bottom of the vehicle or trailer, and ii. intersects the point that is 1.74 metres above the ground and 1.21 metres beyond the rear of the vehicle or trailer, as shown in Figure 4. 4. When the device is deployed, no portion of the device that is more than 1.9 metres above the ground extends more than 1.52 metres beyond the rear of the vehicle or trailer, as shown in Figure 4. (2) In subparagraph 3 i of subsection (1), “rear bottom of the vehicle or trailer” means, (a) if the vehicle or trailer is equipped with a rear impact guard, the rear bottom edge of the rear impact guard, or (b) if the vehicle or trailer is not equipped with a rear impact guard, the rear bottom edge of its rearmost component having structural properties, including the deck, stairs or ramp, but excluding auxiliary equipment or machinery. O. Reg. 8/16, s. 2.
Read the vehicle weights and dimensions — for safe, productive and infrastructure-friendly vehicles on e-Laws ↗

Made under Highway Traffic Act, R.S.O. 1990, c. H.8.