Designated Substance — asbestos on construction projects and in buildings and repair operations, O. Reg. 278/05
Section 12
Type 1, Type 2 and Type 3 operations
Cite as Designated Substance — asbestos on construction projects and in buildings and repair operations, O. Reg. 278/05, s. 12 · current to November 11, 2026 · consolidated from July 1, 2026 · read from e-Laws on November 16, 2026
The text
(1) For the purposes of this Regulation, operations that may expose a worker to asbestos are classified as Type 1, Type 2 and Type 3 operations. O. Reg. 278/05, s. 12 (1).
(2) The following are Type 1 operations:
1. Installing or removing ceiling tiles that are asbestos-containing material, if the tiles cover an area less than 7.5 square metres and are installed or removed without being broken, cut, drilled, abraded, ground, sanded or vibrated.
2. Installing or removing non-friable asbestos-containing material, other than ceiling tiles, if the material is installed or removed without being broken, cut, drilled, abraded, ground, sanded or vibrated.
3. Breaking, cutting, drilling, abrading, grinding, sanding or vibrating non-friable asbestos-containing material if,
i. the material is wetted to control the spread of dust or fibres, and
ii. the work is done only by means of non-powered hand-held tools.
4. Removing less than one square metre of drywall in which joint-filling compounds that are asbestos-containing material have been used. O. Reg. 278/05, s. 12 (2).
(3) The following are Type 2 operations:
1. Removing all or part of a false ceiling to obtain access to a work area, if asbestos-containing material is likely to be lying on the surface of the false ceiling.
2. The removal or disturbance of one square metre or less of friable asbestos-containing material during the repair, alteration, maintenance or demolition of all or part of machinery or equipment or a building, aircraft, locomotive, railway car, vehicle or ship.
3. Enclosing friable asbestos-containing material.
4. Applying tape or a sealant or other covering to pipe or boiler insulation that is asbestos-containing material.
5. Installing or removing ceiling tiles that are asbestos-containing material, if the tiles cover an area of 7.5 square metres or more and are installed or removed without being broken, cut, drilled, abraded, ground, sanded or vibrated.
6. Breaking, cutting, drilling, abrading, grinding, sanding or vibrating non-friable asbestos-containing material if,
i. the material is not wetted to control the spread of dust or fibres, and
ii. the work is done only by means of non-powered hand-held tools.
7. Removing one square metre or more of drywall in which joint filling compounds that are asbestos-containing material have been used.
8. Breaking, cutting, drilling, abrading, grinding, sanding or vibrating non-friable asbestos-containing material if the work is done by means of power tools that are attached to dust-collecting devices equipped with HEPA filters.
9. Removing insulation that is asbestos-containing material from a pipe, duct or similar structure using a glove bag.
10. Cleaning or removing filters used in air handling equipment in a building that has sprayed fireproofing that is asbestos-containing material.
11. An operation that,
i. is not mentioned in any of paragraphs 1 to 10,
ii. may expose a worker to asbestos, and
iii. is not classified as a Type 1 or Type 3 operation. O. Reg. 278/05, s. 12 (3).
(4) The following are Type 3 operations:
1. The removal or disturbance of more than one square metre of friable asbestos-containing material during the repair, alteration, maintenance or demolition of all or part of a building, aircraft, ship, locomotive, railway car or vehicle or any machinery or equipment.
2. The spray application of a sealant to friable asbestos-containing material.
3. Cleaning or removing air handling equipment, including rigid ducting but not including filters, in a building that has sprayed fireproofing that is asbestos-containing material.
4. Repairing, altering or demolishing all or part of a kiln, metallurgical furnace or similar structure that is made in part of refractory materials that are asbestos-containing materials.
5. Breaking, cutting, drilling, abrading, grinding, sanding or vibrating non-friable asbestos-containing material, if the work is done by means of power tools that are not attached to dust-collecting devices equipped with HEPA filters.
6. Repairing, altering or demolishing all or part of any building in which asbestos is or was used in the manufacture of products, unless the asbestos was cleaned up and removed before March 16, 1986. O. Reg. 278/05, s. 12 (4).
(5) Work on ceiling tiles, drywall or friable asbestos-containing material is classified according to the total area on which work is done consecutively in a room or enclosed area, even if the work is divided into smaller jobs. O. Reg. 278/05, s. 12 (5).
(6) The following provisions apply if a dispute arises as to the classification of an operation under this section:
1. A party to the dispute may notify an inspector at the office of the Ministry of Labour nearest the workplace of the dispute.
2. The party who notifies the inspector shall promptly inform the other parties that the inspector has been notified.
3. Work on the operation shall cease until the inspector has given a decision under paragraph 4.
4. The inspector shall, as soon as possible, investigate the matter and give the parties a decision in writing. O. Reg. 278/05, s. 12 (6).
(7) Nothing in subsection (6) affects an inspector’s power to issue an order for a contravention of this Regulation. O. Reg. 278/05, s. 12 (7).
Read the Designated Substance — asbestos on construction projects and in buildings and repair operations on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.