Meat, O. Reg. 31/05
Section 113
Form of inspection legend
Cite as Meat, O. Reg. 31/05, s. 113 · current to November 11, 2026 · consolidated from January 1, 2021 · read from e-Laws on November 16, 2026
The text
(1) An inspection legend shall be in one of the following forms:
(2) Subject to subsection (3), the number of the meat plant shall be substituted for the numbers 000 or 0000, as applicable, in the inspection legend. O. Reg. 31/05, s. 113 (2); O. Reg. 285/13, s. 59 (2).
(3) The number of the meat plant is not required on an inspection legend that is placed on the label required under this Part for a meat product if,
(a) the label is applied to a hermetically sealed container that is marked in accordance with clauses 99 (4) (d) and (e);
(b) the label is applied to a casing or bag closed by a metal clip and the number of the meat plant is legibly engraved on the metal clip and is visible when the clip is closed; or
(c) the label is applied to a cardboard container, a corrugated fibreboard container, a bulk container or a plastic container and the number of the meat plant is clearly marked elsewhere on the principal display panel. O. Reg. 31/05, s. 113 (3).
(4) The inspection legend shall have no transverse measurement through the centre of the legend of,
(a) less than 10 millimetres, if the legend is placed on a label required under this Part for a meat product; and
(b) less than 25 millimetres, if the legend is stamped directly on a meat product. O. Reg. 31/05, s. 113 (4).
(5) If ink is used to directly stamp an inspection legend on a meat product, only ink that is fit for human consumption shall be used for the legend. O. Reg. 31/05, s. 113 (5).
Read the Meat on e-Laws ↗
Made under Food Safety and Quality Act, 2001, S.O. 2001, c. 20.