certification of drinking water system Operators and water quality analysts, O. Reg. 128/04
Section 26
Duties of operator-in-charge
Cite as certification of drinking water system Operators and water quality analysts, O. Reg. 128/04, s. 26 · current to November 11, 2026 · consolidated from December 3, 2021 · read from e-Laws on November 16, 2026
The text
(1) An operator-in-charge is authorized to,
(a) set operational parameters for the subsystem or for a process that controls the effectiveness or efficiency of the subsystem; and
(b) direct or instruct other operators in the subsystem to set such operational parameters. O. Reg. 128/04, s. 26 (1).
(2) An operator-in-charge shall,
(a) take all steps reasonably necessary to operate the processes within his or her responsibility in a safe and efficient manner in accordance with the relevant operations manuals;
(b) ensure that the processes within his or her responsibility are measured, monitored, sampled and tested in a manner that permits them to be adjusted when necessary;
(c) ensure that records are maintained of all adjustments made to the processes within his or her responsibility; and
(d) ensure that all equipment used in the processes within his or her responsibility is properly monitored, inspected, tested and evaluated and that records of equipment operating status are prepared and available at the end of every operating shift. O. Reg. 128/04, s. 26 (2).
Read the certification of drinking water system Operators and water quality analysts on e-Laws ↗
Made under Safe Drinking Water Act, 2002, S.O. 2002, c. 32.