Electrical distribution safety, O. Reg. 22/04
Section 9
Deviations from required standards
Cite as Electrical distribution safety, O. Reg. 22/04, s. 9 · current to November 11, 2026 · consolidated from October 1, 2017 · read from e-Laws on November 16, 2026
The text
(1) Where a distributor upgrades the distribution lines of a distribution system such that the system does not meet the standards for clearances and separations in respect of distribution lines referred to in subsection 5 (2) or (3), the distributor may still put the system into use if a professional engineer certifies that,
(a) the reason for failing to meet the standards was a lack of space; and
(b) the failure to meet the standards will not materially affect the safety of any person or property. O. Reg. 22/04, s. 9 (1).
(2) If a distributor replaces a part or portion of an existing distribution system with a part or portion that is similar to the part or portion being replaced but that part or portion does not meet the safety standards set out in section 4, the distributor may put the system into use as long as no undue hazard to the safety of any person is created by doing so. O. Reg. 22/04, s. 9 (2).
Read the Electrical distribution safety on e-Laws ↗
Made under Electricity Act, 1998, S.O. 1998, c. 15, Sched. A.