Electrical distribution safety, O. Reg. 22/04
Section 7
Approval of plans, drawings and specifications for installation work
Cite as Electrical distribution safety, O. Reg. 22/04, s. 7 · current to November 11, 2026 · consolidated from October 1, 2017 · read from e-Laws on November 16, 2026
The text
(1) Before beginning work on an electrical installation that is or may form part of a distribution system, a distributor shall ensure that the installation work is based,
(a) on plans that have been prepared by a professional engineer and that the plans have been reviewed and approved in accordance with subsections (2) to (7); or
(b) on the distributor’s standard design drawings or standard design specifications that have been assembled by a professional engineer, by an engineering technologist certified by the Ontario Association of Certified Engineering Technicians and Technologists or by another competent person and that those standard drawings and specifications have been reviewed and approved in accordance with subsections (2) to (7). O. Reg. 22/04, s. 7 (1); O. Reg. 272/04, s. 2.
(2) Review and approval of plans, standard design drawings and standard design specifications under this section shall be carried out,
(a) by a professional engineer, who may or may not be the professional engineer who prepared the plans or assembled the standard design drawings or standard design specifications; or
(b) by the Authority at the request of the distributor. O. Reg. 22/04, s. 7 (2).
(3) Where, after reviewing the plans, standard design drawings or standard design specifications under clause (2) (a), a professional engineer is satisfied that the safety standards set out in section 4 are met, he or she shall prepare a certificate and provide it to the distributor. O. Reg. 22/04, s. 7 (3).
(4) A certificate under subsection (3) constitutes approval of the plans, standard design drawings or standard design specifications. O. Reg. 22/04, s. 7 (4).
(5) Where, after reviewing the plans, standard design drawings or standard design specifications under clause (2) (b), the Authority is satisfied that the safety standards set out in section 4 are met, it shall approve them and provide a certificate of approval to the distributor. O. Reg. 22/04, s. 7 (5).
(6) The plans, standard design drawings or standard design specifications, along with the certificate, shall be kept by the distributor and made available to the Authority upon request. O. Reg. 22/04, s. 7 (6).
(7) This section does not apply with respect to work on an electrical installation that involves the replacement of one piece of electrical equipment with another piece of electrical equipment of the same voltage and characteristics. O. Reg. 22/04, s. 7 (7).
Read the Electrical distribution safety on e-Laws ↗
Made under Electricity Act, 1998, S.O. 1998, c. 15, Sched. A.