amusement devices, O. Reg. 221/01
Section 10
Alteration
Cite as amusement devices, O. Reg. 221/01, s. 10 · current to November 11, 2026 · consolidated from January 1, 2009 · read from e-Laws on November 16, 2026
The text
(1) A licence holder shall submit the documents set out in subsection (2) to the director if the licence holder proposes to alter the structural design, the inherent safety or the operational characteristics of an amusement device for which a permit has been issued by, without limiting the generality of the foregoing,
(a) changing the maximum capacity or speed of an amusement device;
(b) changing the load bearing structure of an amusement device;
(c) changing the source of power for the main drive or control mechanism of an amusement device;
(d) changing the method of guiding the passenger-carrying units of an amusement device;
(e) changing the use of an amusement device from a primary use by adults to children and vice versa;
(f) relocating an amusement device that was originally designed as non-portable;
(g) changing an amusement device from ground-mounted to trailer-mounted or vice versa if the change would require an alteration in the design or the operational characteristics of the device, including a change to the area peripheral to the device if that area is accessible to the public;
(h) replacing passenger carrying units with passenger carrying units differing from original design or manufacture; or
(i) adding passenger carrying units to an amusement device with passenger carrying units differing from original design or manufacture. O. Reg. 221/01, s. 10 (1); O. Reg. 249/08, s. 9.
(2) The documents to be submitted under subsection (1) are,
(a) a detailed description of the proposed alteration; and
(b) all documents required to be filed as part of the technical dossier under subsection 9 (2) that relate to the proposed alteration. O. Reg. 221/01, s. 10 (2).
(3) A licence holder who proposes to make an alteration described in subsection (1) shall ensure that,
(a) the alteration is made by or under the direct supervision of the licence holder;
(b) the alteration is carried out in conformity with the requirements of this Regulation; and
(c) the amusement device is inspected by an inspector prior to being put into operation after the alteration is made. O. Reg. 221/01, s. 10 (3).
(4) If, after a permit has been issued for an amusement device, the licence holder proposes to make an alteration to it, other than an alteration described in subsection (1), that affects the data contained in the technical dossier for the device, the holder shall submit to the director an amendment to the technical dossier outlining the alteration,
(a) forthwith, if the alteration is an alteration that affects the safe operation of the device; or
(b) at the time that the licence holder applies for a renewal of the permit for the device, if the alteration is not an alteration that affects the safe operation of the device. O. Reg. 221/01, s. 10 (4).
(5) A permit holder who proposes to make an alteration to an amusement device in accordance with subsection (4) shall ensure that,
(a) the proposed alteration is in conformity with this Regulation; and
(b) the proposed alteration complies with the manufacturer’s specifications or is approved by a professional engineer. O. Reg. 221/01, s. 10 (5).
Read the amusement devices on e-Laws ↗
Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.