Boilers and Pressure Vessels, O. Reg. 220/01

Section 7

Alterations

Cite as Boilers and Pressure Vessels, O. Reg. 220/01, s. 7 · current to November 11, 2026 · consolidated from July 1, 2018 · read from e-Laws on November 16, 2026

The text

(1) No person shall alter a boiler, pressure vessel, fitting or piping unless the alteration is registered and is inspected by an inspector. O. Reg. 220/01, s. 7 (1). (2) No person shall put into operation or use, (a) a boiler or pressure vessel to which an alteration has been made unless a new registration and certificate of inspection have been issued; (b) a piping or fitting to which an alteration has been made unless a new registration has been issued. O. Reg. 220/01, s. 7 (2). (3) No person shall repair a boiler, pressure vessel, fitting or piping without the prior concurrence of and subsequent inspection by an inspector or, where the thing is insured, without the prior concurrence of and subsequent inspection by the insurer, as the case requires. O. Reg. 220/01, s. 7 (3). (4) A boiler, pressure vessel, fitting or piping that is altered or repaired under this section shall not be operated or used or be permitted to be operated or used unless it is inspected by an inspector or an insurer. O. Reg. 220/01, s. 7 (4). (5) Subsections (3) and (4) do not apply with respect to boilers, pressure vessels, fittings and piping for which a program for repair and self-inspection is in place that satisfies the director that the repair or alteration will be carried out in a safe manner. O. Reg. 220/01, s. 7 (5).
Read the Boilers and Pressure Vessels on e-Laws ↗

Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.