Boilers and Pressure Vessels, O. Reg. 220/01

Section 13

Welding and brazing requirements

Cite as Boilers and Pressure Vessels, O. Reg. 220/01, s. 13 · current to November 11, 2026 · consolidated from July 1, 2018 · read from e-Laws on November 16, 2026

The text

(1) The welding and brazing procedures used in the manufacture, installation, alteration or repair of a boiler, pressure vessel, fitting or piping are established as set out in the code adoption document and shall be submitted to the director. O. Reg. 220/01, s. 13 (1). (2) Every welder, welding operator, brazer or brazing operator shall pass such tests as the director may require and pay the fee set by the Corporation for taking the tests. O. Reg. 220/01, s. 13 (2); O. Reg. 420/17, s. 11 (2). (3) No person shall act as a welder, welding operator, brazer or brazing operator unless the person is certified in accordance with the code adoption document. O. Reg. 220/01, s. 13 (3). (4) The director shall issue a certificate to every welder, welding operator, brazer or brazing operator who passes the required tests and pays the fee set by the Corporation. O. Reg. 220/01, s. 13 (4); O. Reg. 420/17, s. 11 (2). (5) A welder, welding operator, brazer or brazing operator may be required at any time to pass such further tests as may be required in the code adoption document and, on being so required, his or her certificate shall be provisionally suspended, but a new certificate shall be issued to the welder, welding operator, brazer or brazing operator who passes the required tests and pays the fee set by the Corporation. O. Reg. 220/01, s. 13 (5); O. Reg. 420/17, s. 11 (2). (6) Every welder, welding operator, brazer or brazing operator shall have his or her certificate readily available and produce it when requested by an inspector. O. Reg. 220/01, s. 13 (6). (7) When a welder, welding operator, brazer or brazing operator is first employed or changes employer, he or she shall not begin welding or brazing for his or her employer or for the new employer until he or she has passed such further tests as the director may require. O. Reg. 220/01, s. 13 (7). (8) A welder, welding operator, brazer or brazing operator shall only weld or braze for the employer named on his or her certificate and only with respect to the type of welding or brazing set out in the certificate. O. Reg. 220/01, s. 13 (8). (9) An employer shall only permit a welder, welding operator, brazer or brazing operator to weld or braze if, (a) the employer is the employer named in the person’s certificate; and (b) the person welds or brazes in accordance with his or her certificate. O. Reg. 220/01, s. 13 (9). (10) No welder, welding operator, brazer or brazing operator shall weld, (a) except in accordance with a procedure set out in the code adoption document; (b) unless he or she is the holder of a subsisting certificate; (c) in the employ of an employer other than the employer named in his or her certificate; and (d) anything where he or she is not qualified in the appropriate class or position of welding as set out in the code adoption document. O. Reg. 220/01, s. 13 (10). (11) In this section, “employer” includes a trade association of persons or companies whose business includes welding or brazing. O. Reg. 220/01, s. 13 (11).
Read the Boilers and Pressure Vessels on e-Laws ↗

Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.