Boilers and Pressure Vessels, O. Reg. 220/01
Section 11
Unacceptable condition
Cite as Boilers and Pressure Vessels, O. Reg. 220/01, s. 11 · current to November 11, 2026 · consolidated from July 1, 2018 · read from e-Laws on November 16, 2026
The text
(1) In this section,
“unacceptable condition” with respect to a boiler, pressure vessel, fitting or piping, means a boiler, pressure vessel, fitting or piping where,
(a) it is being used in an unsafe manner,
(b) there is any deterioration that is likely to impair its safe operation,
(c) an alteration to it has not been registered and inspected in accordance with section 7, or
(d) the condition of the relief valves or piping is likely to impair its safe operation. O. Reg. 420/17, s. 8.
(2) If, in the opinion of an inspector or an insurer of a boiler, pressure vessel, fitting or piping, or a third party inspection provider acting on behalf of the insurer, it is in an unacceptable condition,
(a) the third party inspection provider shall notify the insurer forthwith, if it is the third party inspection provider that forms that opinion;
(b) the inspector or insurer shall notify the director forthwith and shall not issue a record of inspection in respect of the boiler or pressure vessel;
(c) an inspector shall take those steps that are necessary to remove the danger, including affixing a seal, disconnecting the power or other means; and
(d) the director may cancel any certificate of design registration issued for it under section 4 or any certificate of inspection issued for it. O. Reg. 420/17, s. 8.
Read the Boilers and Pressure Vessels on e-Laws ↗
Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.