Boilers and Pressure Vessels, O. Reg. 220/01
Section 10.1
Application for certificate of inspection
Cite as Boilers and Pressure Vessels, O. Reg. 220/01, s. 10.1 · current to November 11, 2026 · consolidated from July 1, 2018 · read from e-Laws on November 16, 2026
The text
(1) Subject to subsection (3), an owner or operator may obtain a certificate of inspection in respect of a boiler or pressure vessel only by applying to the Corporation for the certificate by,
(a) filing with the Corporation the record of inspection that the owner or operator receives for the boiler or pressure vessel, as the case may be;
(b) paying the fee set by the Corporation; and
(c) submitting a completed application form, if any, published by the Corporation. O. Reg. 420/17, s. 8.
(2) An owner or operator may make the application in electronic format. O. Reg. 420/17, s. 8.
(3) An owner or operator who receives a record of inspection on or after the day this section comes into force shall apply for a certificate of inspection no later than 30 days after receiving the record of inspection. O. Reg. 420/17, s. 8.
(4) If an owner or operator has applied to the Corporation for a certificate of inspection in accordance with subsection (1), the director shall issue a certificate of inspection to the applicant. O. Reg. 420/17, s. 8.
(5) A certificate of inspection remains valid for the period specified by the director. O. Reg. 420/17, s. 8.
(6) The owner of every boiler or pressure vessel in respect of which a certificate of inspection has been issued shall keep the certificate in good condition and post it in a conspicuous place near the boiler or pressure vessel, as the case may be, or, if that is impractical, at the place that an inspector or the insurer of it directs in writing. O. Reg. 420/17, s. 8.
Read the Boilers and Pressure Vessels on e-Laws ↗
Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.