OPERATING ENGINEERS, O. Reg. 219/01
Section 6
Contents of a plant certificate of registration
Cite as OPERATING ENGINEERS, O. Reg. 219/01, s. 6 · current to November 11, 2026 · consolidated from June 27, 2001 · read from e-Laws on November 17, 2026
The text
(1) A certificate of registration for a plant shall state,
(a) the name of the plant user or users;
(b) the name of the plant or the name the plant goes by;
(c) the location of the plant;
(d) the registration number;
(e) the type of plant;
(f) the number of units, type, rating and code of,
(i) boilers,
(ii) steam prime movers,
(iii) compressors,
(iv) refrigeration compressors,
(v) total plant rating;
(g) economizers and accumulators recorded in low water volume boiler plants;
(h) the units sealed;
(i) dual controls;
(j) registered equipment operations limiting interlocks;
(k) tubes blocked to reduce boiler power rating;
(l) burner input reduced to reduce boiler power rating;
(m) maximum safety valves settings for each pressure type;
(n) maximum water temperature in hot water heating plants;
(o) required maintenance programs;
(p) level of operating staff and attendance required by,
(i) chief operating engineer or operator,
(ii) shift operating engineer or operator,
(iii) assistant shift operating engineer or operator. O. Reg. 219/01, s. 6 (1).
(2) A certificate of registration for a traction plant shall state,
(a) the name of the owner;
(b) the registered address of the plant;
(c) the registration number;
(d) the name of the manufacturer;
(e) the type of traction plant;
(f) the power rating; and
(g) the safety valve setting. O. Reg. 219/01, s. 6 (2).
Read the OPERATING ENGINEERS on e-Laws ↗
Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.