Certification of Petroleum Mechanics, O. Reg. 216/01

Section 6

Qualifications for certificate

Cite as Certification of Petroleum Mechanics, O. Reg. 216/01, s. 6 · current to November 11, 2026 · consolidated from August 1, 2008 · read from e-Laws on November 16, 2026

The text

(1) An applicant for a certificate shall have successfully completed a program approved by the director that is delivered by a training organization approved by the director for each class of certificate sought by the applicant. O. Reg. 216/01, s. 6 (1). (2) An applicant shall have successfully completed an examination or a series of examinations, conducted or approved by the director, demonstrating that the applicant possesses the necessary knowledge and competence for each class of certificate sought by the applicant. O. Reg. 216/01, s. 6 (2). (3) If the applicant fails the examination or series of examinations on three successive attempts, the applicant shall successfully complete the program described in subsection (1) after making the unsuccessful attempts and before taking the examination or series of examinations again, and subsection (5) does not apply. O. Reg. 216/01, s. 6 (3). (4) If the applicant fails the examination or series of examinations for a class of certificate, he or she is not entitled to take the examination or series of examinations for the class of certificate until, (a) he or she makes a new application for the class of certificate; and (b) 30 days have passed since the applicant took the examination or series of examinations. O. Reg. 216/01, s. 6 (4). (5) An applicant is not required to comply with subsection (1) if the director is satisfied that the applicant possesses the necessary knowledge and competence with respect to each class of certificate sought by the applicant. O. Reg. 216/01, s. 6 (5).
Read the Certification of Petroleum Mechanics on e-Laws ↗

Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.