Fuel Industry Certificates, O. Reg. 215/01
Section 52
CDT certificate
Cite as Fuel Industry Certificates, O. Reg. 215/01, s. 52 · current to November 11, 2026 · consolidated from January 1, 2022 · read from e-Laws on November 16, 2026
The text
(1) A person who holds a CDT certificate may install, inspect, alter, purge, activate, repair, service or remove a natural gas or propane-fired agricultural crop drying appliance and the equipment and accessories essential to its operation. O. Reg. 184/03, s. 1.
(2) When performing a function described in subsection (1), the person may do the following:
1. Install, inspect, test, alter, purge, activate, repair, service or remove any piping or tubing, or component in a piping or a tubing system, to an agricultural crop drying appliance downstream of the natural gas meter or propane service valve.
2. Ensure safe installation, utilization, maintenance, repair or removal of agricultural crop drying equipment.
3. Maintain, service or replace a mechanical or electrical component or accessory forming part of an appliance or essential to its operation.
4. Perform the tasks that are necessary to replace controls and components forming part of an appliance.
5. Install, repair, service and maintain electrical wiring for natural gas or propane-fired appliances from an existing branch circuit containing over current protection, but shall not run wiring back to the panel or perform any other type of electrical work related to wiring of the appliance unless the person holds a certificate of qualification or a provisional certificate of qualification in the trade of electrician — construction and maintenance or electrician — domestic and rural, that is not suspended and that is issued under the Building Opportunities in the Skilled Trades Act, 2021.
6. Service and replace electrical switches, fuses and components that are directly related to the operation of the agricultural crop drying appliance. O. Reg. 215/01, s. 52 (2); O. Reg. 441/12, s. 5; O. Reg. 195/19, s. 2; O. Reg. 887/21, s. 1.
(3) Despite subsection (1), a holder of a CDT certificate is not permitted to activate initially equipment referred to in that subsection, unless the certificate holder has at least one year of work experience as a CDT certificate holder on such equipment. O. Reg. 253/08, s. 31.
Read the Fuel Industry Certificates on e-Laws ↗
Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.