Fuel Industry Certificates, O. Reg. 215/01

Section 20

G.1 certificate

Cite as Fuel Industry Certificates, O. Reg. 215/01, s. 20 · current to November 11, 2026 · consolidated from January 1, 2022 · read from e-Laws on November 16, 2026

The text

(1) A person who is the holder of a G.1 certificate may install, inspect, alter, purge, activate, repair, service or remove a natural gas or propane appliance of any BTU input and the equipment and accessories essential to its operation. O. Reg. 215/01, s. 20 (1). (2) A person who is certified to carry out the functions described in subsection (1), may also do the following: 1. Install, inspect, test, alter, purge, activate, repair, service or remove any piping or tubing, or component in a piping or tubing system, to an appliance downstream of the natural gas meter or propane vapour service valve. 2. Install, inspect, alter, repair, service or remove any vent, vent connector, draft control device or other component in an appliance venting system. 3. Disconnect and reconnect water piping in order to exchange, service or install an approved appliance and carry out the replacement of water pipe necessary to complete the reconnection or installation of controls, control systems, components and accessories that are essential to the operation of the appliance, but the person shall not perform any additional plumbing unless he or she is the holder of a certificate of qualification or a provisional certificate of qualification in the trade of plumber or steamfitter, that is not suspended and that is issued under the Building Opportunities in the Skilled Trades Act, 2021. 4. Maintain, service or replace a mechanical or electrical component or accessory that forms part of an appliance or that is essential to the operation of the appliance. 5. Perform such tasks as are necessary to replace controls and components that form part of an appliance. 6. Install, service, remove or replace components and accessories that form part of the gas-side of a refrigerating or air-conditioning unit, but the person shall not perform any work beyond the gas-side unless he or she is the holder of a certificate of qualification or a provisional certificate of qualification in the trade of refrigeration and air conditioning systems mechanic or residential air conditioning systems mechanic, that is not suspended and that is issued under the Building Opportunities in the Skilled Trades Act, 2021. 7. Install, repair, service and maintain electrical wiring from an existing branch circuit containing overcurrent protection to appliances in order to exchange, service, repair or install an approved appliance and carry out the replacement of electrical wiring necessary to complete the reconnection or installation of controls, control systems, components and accessories that are essential to the operation of the appliance, but the person shall not run wiring back to the electrical supply panel or perform any additional wiring unless he or she is the holder of a certificate of qualification or a provisional certificate of qualification in the trade of electrician — construction and maintenance or electrician — domestic and rural, that is not suspended and that is issued under the Building Opportunities in the Skilled Trades Act, 2021. 8. Install, repair, service, remove or replace the plenum connection or components forming part of the plenum connection in order to complete the installation of a natural gas or propane appliance, but the person shall not perform any sheet metal work beyond the plenum connection unless he or she is the holder of a certificate of qualification or a provisional certificate of qualification in the trade of residential (low rise) sheet metal installer or sheet metal worker, that is not suspended and that is issued under the Building Opportunities in the Skilled Trades Act, 2021. 9. Service a flue where an oil appliance is vented through the same flue as a gas appliance. 10. Remove a fuel oil appliance, and the equipment and accessories, but not the aboveground storage tanks associated with the fuel oil appliance during a conversion of the fuel oil appliance from fuel oil to natural gas or propane gas. O. Reg. 215/01, s. 20 (2); O. Reg. 441/12, s. 2; O. Reg. 887/21, s. 1.
Read the Fuel Industry Certificates on e-Laws ↗

Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.