Fuel Industry Certificates, O. Reg. 215/01

Section 1

Interpretation

Cite as Fuel Industry Certificates, O. Reg. 215/01, s. 1 · current to November 11, 2026 · consolidated from January 1, 2022 · read from e-Laws on November 16, 2026

The text

(1) In this Regulation, “appliance” means a device that consumes or is intended to consume a gas and includes all valves, fittings, controls and components attached or to be attached to it; (“appareil”) “approved” means, with respect to an appliance or component, that the appliance or component bears the label or symbol of a designated testing organization or a label or symbol authorized by the director, certifying that it complies with a standard or laboratory test report that is listed in the document entitled “Titles of Standards and Laboratory Test Reports Authorized in the Province of Ontario under the Act”, dated August 2002, published by the Technical Standards and Safety Authority and available through its Internet website, or that was listed in a predecessor to that document; (“approuvé”) “direct supervision” means the supervision provided by a supervising certificate holder who is on site in close proximity to a trainee and is available to assist and supervise the trainee; (“supervision directe”) “general supervision” means the supervision provided by a supervising certificate holder who may or may not be on site but who is readily available to assist a trainee; (“supervision générale”) “record of training” means a record issued by an accredited training provider that indicates training received by a person; (“attestation de formation”) “supervising certificate holder” means a person who holds a certificate under this Regulation and provides supervision to a trainee. (“titulaire de certificat de supervision”) O. Reg. 215/01, s. 1 (1); O. Reg. 256/07, s. 1; O. Reg. 253/08, s. 1 (1-4). (2) A reference in this Regulation to a director is a reference to the director to whom the subject matter of this Regulation is assigned. O. Reg. 215/01, s. 1 (2). (3) A reference in this Regulation to “director’s order” is a reference to a safety order under section 14 of the Act, a public safety order under section 31 of the Act or an authorization under clause 36 (3) (a) of the Act. O. Reg. 253/08, s. 1 (5). (4) The document incorporated by reference in the definition of “approved” in subsection (1) includes amendments made to the document from time to time after Ontario Regulation 253/08 is made. O. Reg. 253/08, s. 1 (5).
Read the Fuel Industry Certificates on e-Laws ↗

Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.