Compressed Gas, O. Reg. 214/01

Section 20

Refuelling stations — construction and alteration

Cite as Compressed Gas, O. Reg. 214/01, s. 20 · current to November 11, 2026 · consolidated from August 1, 2007 · read from e-Laws on November 16, 2026

The text

(1) No person shall start, or cause or permit to be started, the construction of a refuelling station or the making of an alteration to a refuelling station unless, (a) the design of the station or the alteration is registered; or (b) the person has submitted to the director, (i) a plan in duplicate in a form acceptable to the director, drawn to scale showing the design of the station or the alteration signed and sealed by a professional engineer, (ii) a declaration of the professional engineer stating that the design complies with all applicable requirements of this Regulation, and (iii) in the case of an alteration, the evidence required by clause 21 (3) (a), if the director requests such evidence. O. Reg. 214/01, s. 20 (1). (2) An application for registration of the design of a refuelling station or an alteration to a refuelling station under clause (1) (a) shall consist of, (a) a plan in triplicate in a form acceptable to the director drawn to scale showing the design of the station or the alteration; (b) in the case of an alteration, the evidence referred to in clauses 21 (3) (a), (b), (c) and (d), if the director requests such evidence; and (c) sufficient information for the director to determine whether the design of the station or the alteration complies with this Regulation. O. Reg. 214/01, s. 20 (2). (3) An applicant who submits the design of a refuelling station or alteration to a refuelling station for registration shall pay the fee set by the designated administrative authority at the time of application. O. Reg. 214/01, s. 20 (3). (4) Upon registering the design, the director shall mark the approval on one set of plans submitted by the applicant and return it to the applicant. O. Reg. 214/01, s. 20 (4). (5) The approved plan shall always be kept at the refuelling station during its construction or alteration. O. Reg. 214/01, s. 20 (5). (6) A VRA station shall be installed in accordance with this Regulation and the code adoption document. O. Reg. 214/01, s. 20 (6). (7) In this section, “professional engineer” means a person who is licensed under the Professional Engineers Act. O. Reg. 214/01, s. 20 (7).
Read the Compressed Gas on e-Laws ↗

Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.