Gaseous Fuels, O. Reg. 212/01
Section 1
Interpretation
Cite as Gaseous Fuels, O. Reg. 212/01, s. 1 · current to November 11, 2026 · consolidated from May 15, 2015 · read from e-Laws on November 16, 2026
The text
(1) In this Regulation,
“appliance” means a device that consumes or is intended to consume a gas and includes all valves, fittings, controls and components attached or to be attached to it;
“approved” means,
(a) with respect to a standard or a laboratory test report, that it is listed in “Titles of Standards and Laboratory Test Reports Authorized in the Province of Ontario under the Ontario Gas Utilization Code” as published by the designated administrative authority from time to time,
(b) with respect to an appliance, equipment, a component or an accessory, that it bears the label or symbol of a designated testing organization or a label or symbol authorized by the director certifying that it complies with an approved standard or a laboratory test report, or
(c) with respect to an installation or work, that it complies with this Regulation;
“certificate” means a certificate issued under Ontario Regulation 215/01 (Fuel Industry Certificates);
“code adoption document” means the “Gaseous Fuels Code Adoption Document” adopted as part of this Regulation under Ontario Regulation 223/01;
“contractor” means a person who carries on, in whole or in part, the business of installing, removing, repairing, altering or servicing appliances, and includes a person or an agent of the person who agrees to install, remove, repair, alter or service appliances sold or leased by the person;
“distributor” means a person who supplies gas to an end user, and “distribute” and “distribution” have corresponding meanings;
“fuel features” means,
(a) parts that use or handle gas, govern combustion or vent combustion products,
(b) construction and installation features that relate to the safe use and handling of gas;
“gas” means a gas as defined in the code adoption document;
“handling” means the transmission, transportation or distribution of gas, or the storage of gas in a container, and “handle” and “handler” have corresponding meanings;
“install” includes placing an appliance in position for permanent or temporary use, venting it and connecting piping to it, and “installation” has a corresponding meaning;
“pipeline” means a pipe that is used for the transmission or distribution of gas and includes fittings, valves, controls, compressor stations, pump stations, pressure regulating stations and meter stations, but does not include the pipe, fittings, valves or controls of the end user;
“ROT” means a record of training issued under Ontario Regulation 215/01 (Fuel Industry Certificates);
“VRA” means a vehicle refuelling appliance that consists of a natural gas compressor package not containing storage, that has a flow rate not in excess of 0.3 cubic metre/minute (10 cubic feet/minute) and that is intended for unattended refuelling;
“work” means the facilities used in the handling of gas. O. Reg. 212/01, s. 1 (1).
(2) In the event of a conflict between a provision of this Regulation and the code adoption document, this Regulation prevails. O. Reg. 212/01, s. 1 (2).
(3) A reference in this Regulation to a director is a reference to the director to whom the subject matter of this Regulation is assigned. O. Reg. 212/01, s. 1 (3).
Read the Gaseous Fuels on e-Laws ↗
Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.