propane storage and handling, O. Reg. 211/01

Section 1

Interpretation

Cite as propane storage and handling, O. Reg. 211/01, s. 1 · current to November 11, 2026 · consolidated from July 1, 2015 · read from e-Laws on November 16, 2026

The text

(1) In this Regulation, “appliance” means a device that consumes or is intended to consume propane and includes all valves, fittings, controls and components attached or to be attached to it; “approved” means, (a) with respect to a standard or a laboratory test report, that it is listed in “Titles of Standards and Laboratory Test Reports Authorized in the Province of Ontario under the Act” as published by the designated administrative authority from time to time, (b) with respect to an appliance, equipment, a component or an accessory, that it bears the label or symbol of a designated testing organization or a label or symbol authorized by the director, certifying that it complies with an approved standard or laboratory test report, (c) with respect to an installation or work, that it complies with this Regulation or, where the installation or work was installed before this Regulation came into force, that it complies with the predecessor to this Regulation as it existed when the installation or work was carried out; “certificate” means a certificate issued under Ontario Regulation 215/01 (Fuel Industry Certificates); “code adoption document” means the “Propane Code Adoption Document” adopted as part of this Regulation under Ontario Regulation 223/01; “contractor” means a person who carries on, in whole or in part, the business of installing, removing, repairing, altering or servicing appliances or equipment, and includes a person or an agent of the person who agrees to install, remove, repair, alter or service appliances or equipment sold or leased by the person; “cylinder handling facility” means a facility where propane in refillable cylinders is sold or otherwise distributed to end users; “distributor” means a person who conveys or supplies propane to an end user, but does not include a person who supplies propane to a vehicle or cylinder, and “distribute” and “distribution” have corresponding meanings; “engineering services” means design and review services and includes services for reviewing plans or drawings, services relating to requests for variances or approvals, services for monitoring field development projects and services relating to site remediation and general consultation; “equipment” means a device that is used in venting propane or in the handling of propane; “facility” means a retail outlet, filling plant, cardlock/keylock, private outlet, vehicle conversion centre or cylinder handling facility where propane is handled; “filling plant” means a filling plant as defined in the CAN/CGA-B149.2-00, “Propane Installation Code”, as amended from time to time; “fire service”, with respect to an area, means, (a) if the area is a municipality and the municipality has established a fire department under clause 2 (2) (b) of the Fire Protection and Prevention Act, 1997, that fire department, (b) if the area is a municipality and the municipality has contracted with the fire department of another municipality to receive fire protection services under clause 2 (5) (b) of the Fire Protection and Prevention Act, 1997, that fire department, (c) if the area is a municipality and neither clause (a) nor clause (b) applies, the community safety officer or community safety team appointed under clause 2 (2) (a) of the Fire Protection and Prevention Act, 1997, or (d) if the area is a territory without municipal organization that has a fire department established by an agreement under clause 3 (2) (b) of the Fire Protection and Prevention Act, 1997, that fire department; “fuel features” means parts that use propane, handle propane, govern combustion or vent combustion products and the features of construction and installation that relate to the safe use and handling of propane; “handling” means the storing, transporting or distributing propane, and includes putting propane into a container or the fuel tank of a motor vehicle and “handle” and “handler” have corresponding meanings; “install” includes placing an appliance or equipment in position for permanent or temporary use, venting it and connecting piping to it, and “installation” has a corresponding meaning; “maintenance” includes, (a) the repair or servicing of equipment or its replacement with identical equipment, (b) the replacement of equipment with equipment that has similar performance specifications where it is not necessary to change the layout perimeters directly associated with the equipment, or (c) subject to clause (b), the performance of any concrete work required to allow installation of a pump or dispenser; “modification” means a reduction, expansion or other layout change or a change in the operation of a facility, but does not include maintenance; “private outlet” means any premises, other than a retail outlet, where propane is put into the fuel tanks of motor vehicles or into cylinders; “professional engineer” means a person who is licensed under the Professional Engineers Act; “propane” means propane as defined in the code adoption document; “propane vehicle” means a vehicle that is designed to travel only or primarily on land and is propelled by an engine fuelled by propane; “retail outlet” means any premises to which the public is invited at which propane is sold and is put into the fuel tanks of motor vehicles or into portable containers with a capacity exceeding 0.5 kg.; “risk and safety management plan” means a risk and safety management plan that sets out the safe operation of a retail outlet, filling plant, cardlock/keylock, private outlet or container refill centre and that meets the requirements of, (a) subsections 3.1 (0.2) and (2) if it is a Level 1 risk and safety management plan, or (b) subsection 3.1 (1) and (2) if it is a Level 2 risk and safety management plan; “ROT” means a record of training under Ontario Regulation 215/01 (Fuel Industry Certificates); “total capacity” means the total volume of fixed, portable, mobile and all other transient storage at a retail outlet, filling plant, cardlock/keylock, private outlet or container refill centre, including the total volume of all cylinders or tanks in which propane is stored and any tanker trunks or rail cars that stay at the retail outlet, filling plant, cardlock/keylock, private outlet or container refill centre for longer than it takes for the propane to be transferred; “transport” means to convey propane, exclusive of the fuel carried for use in the vehicle, other than by pipeline to a distributor, and “transporting” and “transportation” have corresponding meanings; “USWG” means volume in U.S. water gallons; “vehicle conversion centre” means any place where a person carries on the business of, or whose business includes, (a) converting a vehicle designed to travel primarily on highway and propelled by a non‑propane engine so that the vehicle’s engine is fuelled by propane, or (b) repairing, removing, altering or servicing the propane fuel system of a propane vehicle; “work” means a facility used in the handling of propane. O. Reg. 211/01, s. 1 (1); O. Reg. 440/08, s. 1; O. Reg. 331/10, s. 1; O. Reg. 464/10, s. 1. (2) In the event of a conflict between a provision of this Regulation and the code adoption document, this Regulation prevails. O. Reg. 211/01, s. 1 (2).
Read the propane storage and handling on e-Laws ↗

Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.