OIL AND GAS PIPELINE SYSTEMS, O. Reg. 210/01
Section 16
Use of oil and gas pipelines
Cite as OIL AND GAS PIPELINE SYSTEMS, O. Reg. 210/01, s. 16 · current to November 11, 2026 · consolidated from June 27, 2001 · read from e-Laws on November 17, 2026
The text
(1) Before using an oil pipeline, an operating company shall, except with respect to routine maintenance, obtain a declaration from a professional engineer declaring that the design, construction, installation, replacement, extension, reclassification and testing of the pipeline have been carried out in accordance with this Regulation. O. Reg. 210/01, s. 16 (1).
(2) An operating company that has a gas pipeline having a diameter in excess of 219.1 millimetres or that is intended to operate at a pressure in excess of 860 kPa, that is constructed, installed, replaced, extended or upgraded, shall obtain a declaration from a professional engineer declaring that the design of and the construction specifications for the pipeline are in accordance with this Regulation. O. Reg. 210/01, s. 16 (2).
(3) Subsection (2) does not apply to a service line, as defined in the code adoption document, with a diameter of less than 88.9 millimetres. O. Reg. 210/01, s. 16 (3).
(4) Before using a gas pipeline, an operating company that has a gas pipeline installed or tested shall obtain a declaration from a person who is certified for that purpose under Ontario Regulation 215/01 (Fuel Industry Certificates) declaring that the installation or testing was carried out in accordance with this Regulation. O. Reg. 210/01, s. 16 (4).
(5) Before activating a pipeline that has been upgraded, an operating company shall obtain a declaration from a professional engineer declaring that the pipeline has been upgraded. O. Reg. 210/01, s. 16 (5).
(6) An operating company shall file the declaration referred to in subsection (5) with the director, where the upgrading results in an operating stress level greater than 30 per cent of the specified minimum yield strength of the pipeline. O. Reg. 210/01, s. 16 (6).
(7) The operating company shall retain the declarations obtained under subsections (1) to (5) for the life of the pipeline and shall make the records readily available upon request of the director. O. Reg. 210/01, s. 16 (7).
(8) In this section,
“professional engineer” means a person licensed under the Professional Engineers Act. O. Reg. 210/01, s. 16 (8).
Read the OIL AND GAS PIPELINE SYSTEMS on e-Laws ↗
Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.