OIL AND GAS PIPELINE SYSTEMS, O. Reg. 210/01

Section 13

On-site testing and approval

Cite as OIL AND GAS PIPELINE SYSTEMS, O. Reg. 210/01, s. 13 · current to November 11, 2026 · consolidated from June 27, 2001 · read from e-Laws on November 17, 2026

The text

(1) This section applies only to the testing of an appliance, equipment, a component or an accessory that is carried out at the place where the appliance, equipment, component or accessory is installed for its intended use. O. Reg. 210/01, s. 13 (1). (2) A person may apply to the director or an inspector designated by the director, to have an appliance, equipment, a component or an accessory tested under this section. O. Reg. 210/01, s. 13 (2). (3) The director or inspector may refuse to test the appliance, equipment, component or accessory if its design is substantially the same as one that has been tested and approved by a designated testing organization. O. Reg. 210/01, s. 13 (3). (4) The director or inspector may test the appliance, equipment, component or accessory to applicable approved standards or laboratory test reports for the purposes of this Regulation. O. Reg. 210/01, s. 13 (4). (5) If an appliance, equipment, component or accessory tested under this section conforms to the applicable approved standards or laboratory test reports, the director or inspector shall place an approved label or symbol on it. O. Reg. 210/01, s. 13 (5). (6) If an appliance, equipment, component or accessory is tested under this section, the director or inspector shall, (a) determine whether its fuel features comply with the approved standards and this Regulation; and (b) affix or cause to be affixed a label or symbol approved by the director to the appliance, equipment, component or accessory, if the director or inspector determines that its fuel features comply with the approved standards and this Regulation. O. Reg. 210/01, s. 13 (6). (7) The applicant shall provide to the director or inspector all information, and shall conduct or cause to be conducted, all tests required to determine that the appliance, equipment, component or accessory complies with clause (6) (a). O. Reg. 210/01, s. 13 (7). (8) An applicant who applies to have an appliance, equipment, a component or an accessory tested and approved under this section shall pay the fees set by the designated administrative authority for the time reasonably spent, (a) in reviewing information about the thing to be tested; (b) in inspecting its fuel features; (c) in observing any test of the fuel features to determine if they comply with this Regulation; and (d) in use of the thing during testing. O. Reg. 210/01, s. 13 (8).
Read the OIL AND GAS PIPELINE SYSTEMS on e-Laws ↗

Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.