DESCRIPTION AND REGISTRATION, O. Reg. 49/01

Section 6

Monumentation

Cite as DESCRIPTION AND REGISTRATION, O. Reg. 49/01, s. 6 · current to November 11, 2026 · consolidated from July 27, 2026 · read from e-Laws on November 16, 2026

The text

(1) In this section, “monument” includes a monument mentioned in Ontario Regulation 525/91 (Monuments) made under the Surveyors Act and any other thing, device or object used to mark or witness a boundary of surveyed land. O. Reg. 49/01, s. 6 (1). (2) Every exterior angle of the property shall be defined by a standard iron bar, a short standard iron bar, a rock bar, a rock post or a cut cross. O. Reg. 49/01, s. 6 (2). (3) Walls, floors, ceilings or other physical features shall be adopted as the monuments that control the boundaries of exclusive use portions if the boundaries are located within the building or within six metres from a building situated on the property. O. Reg. 49/01, s. 6 (3). (4) In the case of a corporation that is not a vacant land condominium corporation, subject to subsections (5) and (6), walls, floors, ceilings or other physical features shall be adopted as the monuments that control the boundaries of units if the boundaries are located within the building or within six metres from a building situated on the property. O. Reg. 49/01, s. 6 (4). (5) If, under subsection 6 (2) of Ontario Regulation 48/01 (General) made under the Act, the lowermost floor of a building does not have to be in place at the time of registration of the description and if it is not in place at that time, the lower limit of units on the lowermost floor shall be defined by a horizontal plane defined by measurement and referenced to existing physical features of the property. O. Reg. 49/01, s. 6 (5). (6) If, under subsection 6 (3) of Ontario Regulation 48/01 (General) made under the Act, the walls between units or between units and the common elements of a building do not have to be in place at the time of registration of the description and if they are not in place at that time, the boundaries of units shall be defined by cut crosses or a vertical plane defined by measurement and referenced to existing physical features of the property. O. Reg. 49/01, s. 6 (6). (7) Except in a vacant land condominium corporation, an angle in the boundary of a unit that is not defined by a monument mentioned in subsection (4), (5) or (6) shall be defined by an iron bar, a rock post or a cut cross. O. Reg. 49/01, s. 6 (7). (8) In a vacant land condominium corporation, (a) at least one-quarter of the total number of corners and angles in the boundaries of the property and the units shall be defined by a standard iron bar, a rock bar or a rock post; (b) the corners and angles in the boundaries of the property and the units not defined by a monument mentioned in clause (a) shall be defined by an iron bar or a cut cross; and (c) monuments shall be planted at points not more than 150 metres apart. O. Reg. 49/01, s. 6 (8). (9) An angle in the boundary of an exclusive use portion that is not defined by a monument mentioned in subsection (3) shall be defined by an iron bar, a rock post or a cut cross. O. Reg. 49/01, s. 6 (9). (10) Despite subsections (7), (8) and (9), monumentation of exclusive use portions or units intended for parking purposes under those subsections may be limited to the angles in the exterior boundaries of tiers of those portions or units, as the case may be. O. Reg. 49/01, s. 6 (10). (11) Subject to this section, Ontario Regulation 525/91 (Monuments) made under the Surveyors Act, except sections 5 to 9, applies to properties. O. Reg. 49/01, s. 6 (11).
Read the DESCRIPTION AND REGISTRATION on e-Laws ↗

Made under Condominium Act, 1998, S.O. 1998, c. 19.