GENERAL, O. Reg. 48/01

Section 6

Construction complete

Cite as GENERAL, O. Reg. 48/01, s. 6 · current to November 11, 2026 · consolidated from July 20, 2026 · read from e-Laws on November 16, 2026

The text

(1) For the purposes of subsection 5 (8), “has been constructed” means, with respect to each building on the property, constructed at least to the following state: 1. The exterior building envelope, including roofing assembly, exterior wall cladding, doors and windows, caulking and sealants, is weather resistant if required by the construction documents and has been completed in general conformity with the construction documents. 2. Floor assemblies are constructed to the sub-floor. 3. Walls and ceilings of the common elements, excluding interior structural walls and columns in a unit, are completed to the drywall (including taping and sanding), plaster or other final covering. 4. All underground garages, if any, have walls and floor assemblies in place. 5. All elevating devices, if any, as defined in Ontario Regulation 209/01 (Elevating Devices) made under the Technical Standards and Safety Act, 2000, are licensed under that Act if it requires a licence, except for elevating devices contained wholly in a unit and designed for use only within the unit. 6. All installations with respect to the provision of water and sewage services are in place. 7. All installations with respect to the provision of heat and ventilation are in place and heat and ventilation can be provided. 8. All installations with respect to the provision of air conditioning, if any, are in place. 9. All installations with respect to the provision of electricity are in place. 10. All indoor and outdoor swimming pools, if any, are roughed in to the extent that they are ready to receive finishes, equipment and accessories. 11. Subject to paragraphs 2 and 3, the boundaries of the units are completed to the drywall (not including taping and sanding), plaster or other final covering, and perimeter doors are in place. O. Reg. 48/01, s. 6 (1); O. Reg. 383/12, s. 2. (2) Despite paragraph 2 of subsection (1), with respect to units intended for non-residential purposes that are not ancillary to units intended for residential purposes, the lowermost floor does not have to be in place if it is at grade. O. Reg. 48/01, s. 6 (2). (3) Despite paragraphs 3 and 11 of subsection (1), with respect to units intended for non-residential purposes that are not ancillary to units intended for residential purposes, wall or ceiling coverings, interior perimeter doors, interior partitions or walls between units or between units and common elements do not have to be in place. O. Reg. 48/01, s. 6 (3).
Read the GENERAL on e-Laws ↗

Made under Condominium Act, 1998, S.O. 1998, c. 19.