Underground Mine, N.B. Reg. 96-105

Section 212

Shaft ropes

Cite as Underground Mine, N.B. Reg. 96-105, s. 212 · current to July 26, 2024 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

(1) An employer shall ensure that shaft ropes are attached by closed type devices that will not inadvertently disconnect. (2) An employer shall ensure that in a drum hoist installation, the hoisting rope from a shaft conveyance and counterweight is attached to the drum of the hoist. (3) An employer shall ensure that no wedge type attachment is used for attaching a shaft rope to a drum, shaft conveyance, shafthead or other part of a mine hoisting plant unless the attachment is (a) in sound condition, and (b) certified at least once every six years of use as being in sound condition by a competent person or by the manufacturer. (4) When the attachments for a shaft hoisting rope are first installed or reinstalled after disassembling, an employer shall ensure that the following measures and procedures are taken before the hoist is used: (a) two test trips of the shaft conveyance through the working part of the shaft while carrying the equivalent of a normal load; (b) an examination of the attachments upon the completion of the two test trips; (c) any necessary adjustments; and (d) a record of the test trips, examinations and adjustments are entered forthwith in the Hoisting Machinery Record Book by the person or persons making the test trips, adjustments and examinations.
Read the Underground Mine on the Province's website ↗

Made under Occupational Health and Safety Act, c. O-0.2.