General, N.B. Reg. 91-191

Section 350

Operator of brush saw or clearing saw

Cite as General, N.B. Reg. 91-191, s. 350 · current to June 30, 2026 · read from New Brunswick Acts and Regulations on November 16, 2026

The text

An employee who operates a brush saw or a clearing saw shall (a) operate and maintain the saw in accordance with the manufacturer’s specifications, (b) ensure that the saw is equipped with an adequate blade guard, (c) maintain a minimum 10 m distance from any other person while operating the saw, (d) regularly inspect the blade and file it when necessary, (e) replace the blade at the first sign of cracks or fractures, (f) fit the saw only with blades and component parts as specified by the manufacturer, (g) use a harness suitable for use with the saw, (h) ensure that the harness is well maintained and properly adjusted and that the emergency release on the harness functions properly, (i) stop the engine before any manual adjustment, cleaning, clearing of debris or other work is carried out on the blade or blade guard, and (j) not start the saw while it is attached to the harness.
Read the General on the Province's website ↗

Made under Occupational Health and Safety Act, c. O-0.2.